Click image to view original image
custom metal plates
China Name Plate Manufacturers,we custom name plates,
Material:metal,Aluminum,Anodized Aluminum,Brass,Stainless Steel,Polycarbonate,Polyester,Vinyl.
produced when the intake of a small amount of chemical agents to improve the performance of the ink film, and some can accelerate the curing or initiating curing, while others can be the bubble burst, uniform quality ink, reducing the possibility of the conjunctiva. Manufacturers pay additives mixed with the ink, depending on the recipe together, printers are required to dilute the ink suitable for printing consistency. Fourth, Printing: screen printing quality, ink layer thickness and the thickness of the screen, the ink viscosity, hard charging, angle blade plate making process are closely related.
1, the wire version and location: aluminum material three-point boundary positioning. When color printing, the first light-colored print, then printed dark.
2, the distance between the plate and the substrate is 1-2 mm from the size of the screen and selec relevant, good stretch nylon mesh, stretches, generally 2-3 mm.
3, blade with urethane rubber sheet, a hardness of 70-75 degrees, a thickness of 8-9 mm, a blade angle of 70 degrees is appropriate printing, blade speed should be uniform linear motion.
4, appropriate protective films: label after printing in order to avoid cutting and trauma caused during shipment, to be affixed to the surface of the transparent pressure-sensitive adhesive protective film on the back of double-sided tape to paste.
5, cutting: cutting with a small bed, side molding can be used to locate or positioning hole punching.
2 classification edit screen printing plate
Aluminum oxide color printing plate
