Click image to view original image
KCG3 , KCG10 series Proportional solenoid control valves Hydraulic Directional Valves
[Technical Data]
General parameters
|
Quality KG
|
3.4 |
|
Installation location
|
Arbitrarily |
|
Storage temperature range
|
~20~+80 |
|
Ambient temperature range
|
~20~+70 |
|
Maximum operating pressure, port A, B and X Mpa
|
35 |
| Port Y | Independent zero pressure to tank |
| Maximum set pressure, the pressure level 4 Mpa | 0.6-4 |
| Pressure Level 10 Mpa | 0.8-10 |
| Pressure Level 16 Mpa | 0.85-16 |
| Pressure Level 25 Mpa | 0.85-25 |
| Pressure Level 35 Mpa | 0.9-35 |
| Maximum flow 1/min | 5 |
| Pilot flow 1/min | 1 |
| Hydraulic medium |
Mineral hydraulic oil Phosphate ester hydraulic oil |
| Oil temperature | -20~+80 |
|
Viscosity range
|
2.8-500 |
| The maximum allowed level of oil pollution | NAS1638 Level 7 |
| Hysteresis (a reference command value pressure characteristic curve) ≤ | 5 |
|
Repeatability ≤
|
1 |
| Linearity ≤ | Maximum set pressure±3.5 |
1. Specification
Functional description:
The valve is a direct valve controlled by proportional solenoid, it is mainly used for small hydraulic system according to input current, and always used to be taken as the pilot relief valveof a second pressure valve.
1. It is a single-stage valve open loop can be used to directly control the small flow system pressure, or the pressure for greater pilot control valve.
2. Delay return valve, high repeatability.
3. supporting the valve and electric controller, it can be used with ADF11 proportional amplifier.
4. has five pressure ranges, you can still choose one.
