Click image to view original image
ThroughchinaexporterAuthenticate 
production process described1, Overview: Particle board production line can use small diameter wood, wood branches, wood processing residues, such as the wood core, broken boards, logs cut edge of the head and plywood, wood shavings and other plants as raw materials, the production structure or homogeneous structure with a gradient of high quality particleboard . Products can be used for furniture, construction, packaging, vehicles and ships Interior decoration, as well as secondary processing can be made by a variety of decorative plates. 2, the process Production line in 4 steps, the each Section and the Section are equipped with electrical interlocking between, and after the lifting chain can achieve stand-alone control. Aaaaa a full set of equipment Line of automatic assembly line, simple and reliable. 2-1, wood shavings Preparation Section: The belt conveyor of raw materials, metal detectors were sent to the chipper chipper, sharpened wood, the screw conveyor and sent to the wood scraper conveyor Silo for storage. Of wood chips by the screw conveyor hopper sent to shavings planing machine, planing shavings by a good scraper conveyor and sent to the wet shavings bin Storage. 2-2, drying sorting Section: stored in silos in the wet wood shavings from the feed screw conveyor, scraper conveyor sent to the rotor by the dryer to dry wood shavings. Dried by passing dry shavings spiral conveyor, sent to the grading swing sieve, screened and qualified by the sizing screen (surface) small particle, the surface material of dry air delivery system to the surface shavings bin. Screened by a qualified grading sieve shavings, dry shavings bin sent to core; and coarse particle filter failed, sent to sieve ring grinding machine, the grinding and polishing the surface into shavings; wind sent by the material system, sent to the surface shavings bin. 2-3, transfer adhesive, glue Section: The core technology used, the surface particle sizing solutions, respectively. Core, surface and core glue, particle surface were measured by the measuring device, sent to the two mixed plastic ring. Wood shavings and glue in the ring in full uniform mixing rubber mixing machine, the transport aircraft sent to the next process. 2-4, forming Section: loose after the mixed plastic shavings, by mechanical grading (or air) pavement, pavement slab to continuous after the pre-press in the pre-pressure; pre-qualified slab pressure Saw cut by the cross section through the 1,2 speed transport aircraft, to save transport; and then by conveyor to pallet to pallet machine, installed all the slab trigger
|
