DSHD-265H Kinematic Viscometer

 A:Brief description:

  DSHD-265H Kinematic Viscometer is designed according the national standard of People's Republic of China GB/T265 Test Method for Kinematic Viscosity of Petroleum Products and Calculation Methods for Dynamic Viscosity and the industry standard of People's Republic of China SY/T5651 Technical Requirement for Petroleum Products Kinematic Viscosity Tester.

 DSHD-265H Kinematic Viscometer is applied to determine kinematic viscosity of petroleum products (Newton liquids) at a constant temperature as per GB/T265 and ASTM D445.

B:Main technical specifications and parameters
1.Power supply: AC 220 V±10%, 50 Hz
2.Heating power of water bath: 1700 W
3.Temperature range of water bath: room temperature-100.0 °C
4.Temperature controlling accuracy: ±0.01 °C
5.Cubage of water bath: 20 L
6.iming range: 0.0 s-9999.9 s
7.Timing accuracy: no more than  ±0.05% in 60 minutes
8.Sample quantity: four pieces of capillaries are installed at the same time
9.Stirring motor:
  (1) Power: 6 W

  Rotation speed: 1200 RPM
  10.Operation environment:
  (1) Ambient temperature: -10 °C-+35 °C

  (2) Relative humidity: no more than 85%
  11.Temperature sensor: industry platinum resistance, scale number is Pt100
  12.Total power consumption: no more than  1800 W
  13.Capillary viscometer: 7 pieces in total. Inner diameters are 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, and 2.5mm respectively.

C:More Kinematic Viscometer :

DSHD-265H Kinematic Viscometer

DSHD-265D-1 Kinematic Viscometer

DSHD-265D Kinematic Viscometer  

DSHD-265C Kinematic Viscometer

DSHD-265B Kinematic Viscometer

DSHD-265-2 Capillary Viscometer Washer  

DSHD-265-3 Automatic Capillary Viscometer Washer

DSHD-265G Low-temperature Kinematic Viscometer