Composite Check Valve Pneumatic Shut Off Valve Thread to Thread
Description:
- Inline check valve for use in controlling the direction of air flow
- connect male threads at both end.
- Nickel-plated brass tube fitting
- Composite body for resistance to impact and nickel-plated brass valve for resistance to corrosion
-
Handles pressures up to 145 psi (10 bar),bursting pressure is 435 psi(30 bar) an operating temperature range of 0 to 60°C, and a vacuum capability of 750 mm Hg Meets
Applications:
Check valves have two ports and restrict the flow of fluids and other loose materials through a pipe or passageway to one direction. Flow enters through one port and exits through the other, closing when flow reverses or stops. Two common types of check valves are ball cone valves and swing check valves. A ball cone valve utilizes a spring-loaded ball seated against a cone-shaped interior surface to stop the flow of fluid in a forward direction, and a swing check valve has a movable disc on a hinge to block reverse flow. Check valves are rated by their cracking pressure (the minimum upstream pressure required for the valve to operate), and they are used in various water, gas, air, and steam lines.
Competitive Advantage:
This inline connector is a nickel-plated brass push-to-connect fitting. The inline female connector connects two male threaded connections in a straight run. It has a push-to-connect tube connection on female National Pipe Taper (NPT) threads on both end for connecting to male threaded pipes. The NPT threads create a tighter seal than straight threads. This fittings nickel plating is corrosion resistant, ferromagnetic, maintains much of its strength at high temperatures, and stays tough and ductile at low temperatures. The fitting is suitable for handling pressures up to 290 psi (20 bar), has an operating temperature range of 0 to +60°C , and has a vacuum capability of 750 mm Hg.