China Originated Drainage Geocomposite Fiberglass Geogrid Woven With Geotexitle, Bitumen Geocomposite

Product features:

1.) Breadth 1.0m-6.0m ; Weight 200-1500mg/Sq.m.
2.) Reinforce soft soil roadbed,rib side slope of embankment,enhance isolation,inhibit ground deformation,prevent crack by reflection,increase strength of roadbed.
3.) Have both a high tensile strength and modulus of elasticity,resist damage during installtion,and weathering by the atmosphere.

 

 

Product Introduction

 

Coated Fiberglass Geogrid Composite With Geotextile By Glue is an asphalt reinforcement composite that fiberglass geogrid with light weight PET Spunbond Nonwoven Fabric 25 gsm. They are composited together by glue . The chemistry stability is good, the hot-stability is good, anti-weary dehiscence, anti-low temperature shrinkage crack, postponement reduction reflection crack.

Product Function

It can widely apply in the water conservation, the municipal administration, the building, the transportation, the subway, the tunnel, the environmental protection and so on.

 

 

Data:

 

PROPERTY	TEST METHOD	Result
Tensile Strength	GB/T 21825-2008	5050kn/m
Elongation	GB/T 21825-2008	3.95%
Mass per Unit Area (Approx)	GB/T 21825-2008	258g/M2
Melting Point	GB/T 21825-2008	218
Grid Size (center to center of strands)	-	25.4mm x 25.4mm
Adhesive Backing	-	Pressure Sensitive
Weight of the geotextile	-	40g/sqm
Roll Length		100m
Roll Width	-	3.9m
Roll Area	-	390 M2
Roll Quantity	-	270 Rolls
TEST RESULT		PASS