Snow blades for truck

Snow blades for truck:
Snow blades for truck introduction:
Snow blades for truck are along with snow removal truck. The main functions of this snow blade are pushing the snow on the roadside, keeping road safty.Snow blades are widely used for removing snow under the complicated road conditions and clearing the compacted snow; an ideal facility for cleaning snow on urban roads, high class highways, and airport in winter time.

Snow blades for truck features:
1.The snow blade features a moldboard, with the discharge angle adjustable in double directions; the snow blade is 3.0 meters wide and it can be optionally angled left or right greater than or equal to 30 degrees.
2.The new type of hydraulic drive system can work only required to hookup the automobile battery.
3.The operation can be done in the cab, safe and reliable.
4.In the process of removing snow, the cutting edge of the blade is self-adjusting in accordance with the cross slope gradient.
5.The installation and removal of the snow blade is convenient and quick.
6.With a lighting system independent of the vehicle body, the snow blade is convenient for snow removal operation at nights.
7.Reasonably structured, the snow blade can throw snow out of the highway during the speedy snow removal operation, whereas it can push the snow to the roadside during slow snow removal operation.
8.The snow blade has a "trip" feature that, in the case of any point on the cutting edge hitting an obstacle, the snow blade will tip and go over it, effectively protecting the snow blade and the vehicle from damage—the maximum surmountable obstacle height is greater than or equal to 200 millimeters

Snow blades for truck technical parameters:
Model: YHSB-3.0A
Dimension: 3000*1620*1150 mm
Width: 3.0m (Adjustable)
Cleaning Width: ≥ 2.63m
Weight: 880 kg
Operating speed: ≥ 30 km/h
Applicability: 5—10ton truck
Avoidance way: Blade spring avoiding
Max Turning Angle: 30o
Avoidance height: 200 mm