Click image to view original image
This is achieved using a patent protected non-mechanical configuration with solid-state all-crystal design which eliminates the need for mechanical movement. The μs-series fiber optic switch is designed to meet the most demanding switching requirements of reliability, durability, response, and continuous high frequency switching operation.
1x4 solid-state fiber optical switch Features
● No moving parts, best reliability
● Ultra fast switching speed
● Extremely stable latching mode
● Low power consumption
● Easy to route-all fibers on one end
● Exceptional durability and stability
1x4 solid-state fiber optical switch Applications
● Optical switching
● High speed protection
● System monitoring
● Test & measurement
● Fiber-optics sensing system
|
Item |
Unit |
Parameters |
Notes |
||
|
Unidirectional |
Bidirectional |
||||
|
Wavelength Range |
nm |
1525～1565 |
Other band optional |
||
|
Insertion Loss |
dB |
1.8 (Typ.); 2.2 (Max.) |
2.0 (Typ.); 2.4(Max.) |
Add 1.2dB forhigh-powerversion |
|
|
PDL |
dB |
0.2 (Typ.); 0.3(Max.) |
|||
|
Return Loss |
dB |
40 |
30 |
||
|
Crosstalk |
dB |
40 |
35 |
||
|
PMD |
ps |
0.2 |
|||
|
Repeatability |
dB |
+/- 0.01 |
|||
|
Durability |
cycles |
> 30 Billions |
|||
|
Switching Speed |
μs |
100 ~ 400 |
|||
|
Operating Temperature |
°C |
-5 ~ 70 |
|||
|
Storage Temperature |
°C |
-40 ~ 85 |
|||
|
Maximum Optical Power |
mW |
500(forhigh-power version: 5W for CW laser, 700W of peak power for ns-scale pulsed laser) |
|||
|
Dimension( L×W×H ) |
mm |
80×55×18 |
|||
1x4 solid-state fiber optical switch Electrical Specifications
|
Parameter |
Specification |
Unit |
|
Switching Speed |
200~400 |
μs |
|
Switching Voltage(VCC) |
4.5~5.5 |
V |
|
Switching Current |
< 200 |
mA |
|
Pulse Width(typical) |
1000 |
μs |
|
Claim Frequency |
< 800 |
Hz |
1x4 solid-state fiber optical switch Pin Definition
|
Pin No. |
Pin1 |
Pin2 |
Pin3 |
Pin4 |
Pin5 |
Pin6 |
|
Definition |
VCC |
GND |
Ctrl 2 |
Ctrl 1 |
- |
- |
