Click image to view original image
Product Name: Experimental Jaw Crusher
Jaw Crusher Jaw short break, this series of jaw crusher has a crushing ratio, even granularity, simple structure, reliable operation, easy maintenance and operation costs of the economy and so on. Jaw Crusher Application: This series of jaw crusher is mainly used for metallurgy, mining, chemical, cement, construction, refractory and ceramics industries departments in a variety of pieces and the crushing of hard ores and rocks used.
Jaw Crusher Working Principle: The structure of jaw crusher main frame, eccentric shaft, large belt pulley, flywheel, moving jaw, side panels, elbow board, elbow rear plate, adjusting screw, reset spring, fixed jaw plate composition and activities of jaw plate and so on, of which bracket is an important part of equipment insurance.
This series of jaw crusher broken way for music moving extrusion type, motor-driven belt and pulley, through the eccentric shaft so that the jaw moving up and down movement, rise when moving jaw toggle plate and moving jaw angle between the larger, thus promoting the moving jaw board to be close to the jaw plate, while the material is squeezed, rubbing, grinding and other multi-fragmentation; when moving the jaw down, the elbow angle between the plate and moving jaw smaller, fixed jaw plate in bar, under the action of the spring to leave the fixed jaw plate, this time has been broken under the mouth of materials discharged from the crushing chamber, with the mobile jaw crusher motor for continuous rotation of the crushing and nesting periodicity to achieve continuous production.
Jaw Crusher Working Principle: The structure of jaw crusher main frame, eccentric shaft, large belt pulley, flywheel, moving jaw, side panels, elbow board, elbow rear plate, adjusting screw, reset spring, fixed jaw plate composition and activities of jaw plate and so on, of which bracket is an important part of equipment insurance.
This series of jaw crusher broken way for music moving extrusion type, motor-driven belt and pulley, through the eccentric shaft so that the jaw moving up and down movement, rise when moving jaw toggle plate and moving jaw angle between the larger, thus promoting the moving jaw board to be close to the jaw plate, while the material is squeezed, rubbing, grinding and other multi-fragmentation; when moving the jaw down, the elbow angle between the plate and moving jaw smaller, fixed jaw plate in bar, under the action of the spring to leave the fixed jaw plate, this time has been broken under the mouth of materials discharged from the crushing chamber, with the mobile jaw crusher motor for continuous rotation of the crushing and nesting periodicity to achieve continuous production.
Jaw Crusher Features:
1. Crushing chamber depth and had no dead zone, increasing the feed capacity and production;
2. The crushing ratio, uniform particle size;
3. Gasket-style nesting population adjustment device, reliable and convenient adjustment range, increase the flexibility of the device;
4. Lubrication system safe, reliable, easy to replace parts, equipment maintenance simple;
5. Structure is simple, reliable, low operating cost.
6. Equipment Energy: A Single-saving 15% ~ 30%, the system energy saving more than doubled;
7. I adjust the nesting range, can meet different user requirements;
Technical Parameter of laboratory sealed jaw crushers
Laboratory Sealed Jaw Crusher is applicable to medium and fine crushed materiails for the purposes of laboratory and production and primarily provided as environmental protection equipment for coal,electric power,mine,geology,chemical,metallurgy,building material and other industries.The product is produced by the only erterprise designated by the former minis of Geology and Mineral Resources,in compliance with the Industrial standards.
XPC Model Sealed Jaw Crusher is a new generation of crushing equipment with easy open of dynamic and static jaws,convenient clea-up and no blending of samples,It is capable of fine and medium crushing a variety of ores dan materials with compressive strength of 24kg/cm2 and below. With great crushing ratio,unform partcle size and adjustment of ourput size.
|
Model
|
Capacity
|
Inlet size
|
Feed size
|
Output size
|
Rotating speed
|
Power
|
Weight
|
|
|
Kg/h
|
mm
|
mm
|
mm
|
r/min
|
kw
|
kg
|
|
XPC60/100
|
≤400
|
100/60
|
50
|
1-3
|
650
|
1.5
|
100
|
|
XPC100/150
|
≤1800
|
150/100
|
90
|
5-25
|
380
|
2.2
|
190
|
|
XPC100/125
|
≤600
|
125/100
|
80
|
1-6
|
380
|
3
|
360
|
|
XPC150/125
|
≤200
|
150/125
|
100
|
6-38
|
375
|
3
|
417
|
|
XPC150/200
|
≤2000
|
200/150
|
120
|
5-30
|
370
|
5.5
|
450
|
|
XPC150/250
|
≤3000
|
150/250
|
120
|
10-40
|
370
|
5.5
|
500
|
|
SP60/100
|
≤720
|
100/60
|
48
|
0.8-15
|
300
|
2.2
|
330
|
|
SP100/100
|
≤800
|
100/100
|
80
|
0.8-15
|
350
|
3
|
440
|
|
PEX60/100
|
≤500
|
100/60
|
48
|
<196%
|
600
|
1.5
|
200
|
|
PEX100/100
|
≤960
|
100/100
|
80
|
<196%
|
600
|
2.2
|
300
|
|
PEX125/125
|
≤1600
|
125/125
|
110
|
1-15
|
600
|
3
|
360
|
|
PEF60/100
|
≤400
|
100/60
|
45
|
1-10
|
290
|
1.5
|
80
|
|
PEF100/60
|
≤800
|
60/100
|
80
|
0.8-1.5
|
440
|
3
|
400
|
