Silver Car Pressure Relief Valve Turbocharger Protects The Turbo External

HKS Japan import pressure relief valve relief valve the fourth generation SQV turbocharger protects the turbo external valve

Product introduction:

 

Turbocharging system work, full of compressed air inlet pipe road, when the shift or receiving time of valve closed, the gas will be blocked in the throttle backflow phenomenon, outside reflux of high pressure gas can make the high-speed rotating blade reversal of the turbocharger and broken, turbocharging system failure.So in the turbocharged system, there is a bypass valve designed in the inlet pipe, which is commonly referred to as the inlet pressure relief valve.

 

While original inlet pressure relief valve are mostly adopts the inner loop works known as internal drainage inlet pressure relief valve, low cost advantages are simple structure, generally USES the plastic material.However, due to the discharge of the internal leakage pressure valve, the gas will eventually return to the inlet pipe, which can cause a certain amount of leakage pressure, which has a great negative impact on the efficiency of the turbocharger.And the plastic material is easy to age, in the high temperature engine cabin is easy to deform, the service life is greatly reduced.

 

Outer circulating air intake pressure relief valve is to solve this problem arises at the historic moment, due to the leakage type inlet pressure relief valve to return excess gas direct emissions into the atmosphere, there is no pressure is not complete, can effectively improve the work efficiency of turbocharger, so as to improve the power output of engine performance.But if pressure when installation proofreading the early, when the throttle open the line of high pressure gas was out ahead of time, cause pressurization value can not reach the normal level, cause the output of a certain power loss.If the pressure point school is adjusted late, the high-pressure gas in the pipeline cannot be discharged in time after the throttle closes, even causing the turbocharger to be damaged directly.

And high-performance leaked type inlet pressure relief valve is mostly made of high strength lightweight aluminum alloy, light weight and very durable, greatly improving the service life of the inlet pressure release valve, special frustrated voice is also one of the main features of the leaked type inlet pressure relief valve.

Specification

 

1. Product name: metal Car Pressure Relief Valve
2. 100%made of aluminum alloy
3.The pressure valve has two relief functions. It is based on the Angle of the throttle opening to determine the opening of the relief valve

 

Feature

 

Name : Safety Car Pressure relief valve	Brand Name : HKS
Color : black and silver-white	Place Of Origin : CHINA
Material : Aluminum Alloy	Dia : 1 kg

 

 

 

Competitive Advantage:

• High quality and Durable
• Competitive Price
• Adequate Stock
• Fast Delivery
• Convenient Transportation
• Good Service

picture