Aluminum window parts best for aluminium sliding windows extrusion profiles
Product Description
Product | Aluminum window parts best for aluminium sliding windows extrusion profiles |
Material | Alloy 6060, 6061, 6063, etc. |
temper | T5, T6,etc |
Color | Different colors available (black, blue, green, champagne, bronze, golden, vermillion, etc.) |
Surface treatment | Mill finish, anodized, electrophoretic coating, powder coating, thermal break, wood grain/wood-in-shift, etc. |
Mould | Based on your drawing or use our mould free |
Sample time | Usual practice: within 15 working days against payment |
Usages | Windows, doors, curtain wall, solar panel, LED panel, heat sink, industry, etc. |
Certified | ISO9001-2008 Quality System, |
Knowledge of aluminum alloy doors and Windows
There are six main aspects of material materials that can be referenced:
1: Thickness: aluminum alloy sliding door has 70 series, 90 series two kinds, the aluminum alloy sliding door inside the house USES 70 series can. The number of series indicates the size of the frame thickness. Aluminium alloy push window has 55 series, 60 series, 70 series, 90 series four kinds. The series selection should be based on the size of the window and the local wind pressure. The aluminium alloy that is used as enclosed balcony should not be less than 70 series.
2: Strength: the tensile strength should be up to 157 newtons per square meter, and the yield strength should be 108 newtons per square millimeter. When choosing, the hand should be moderately bent, and should be able to return to the original.
3: Colour degree: same aluminum profile colour should be consistent, if chromatism is obvious, be unfavorable choose and buy.
4: Flatness: check the aluminum alloy section surface, should not dent or drum out.
5: Gloss: aluminum alloy doors and Windows avoid open bubbles (white spots) and ash (black dots), as well as obvious defects such as cracks, burrs and peeling.
6: Oxidation: the thickness of the oxide film should be 10 microns. When choose and buy, can be on the surface of profile light, see if the oxidation film of its surface can be erased.