Click image to view original image
Best PCB Soldering Tools High Temperature Resistance High Frequency Soldering Iron
YMK Soldering Iron using electromagnetic heater to high frequency eddy current heating, heating up fast and temperature measurement sensitivity, rebound quickly as well, so that the thermal efficiency is very high.
Power Consumption
| Tip-to-ground resistance | 2Ω |
| Tip-to-ground voltage | 2mV |
| Tip-charged body IR | 5MΩ |
| Electromagnetic heating core | |
| Iron cord | 1.8M |
| Weight | 155g |
Bright Spot:
1. Designed for YMK High Frequency Soldering station .
2. Surprising speed up from room temperature to 350 not more than 20 seconds.
3. Intellectualized soldering with big power, and changes over spot size, again big of solder joint can complete well, can be effectively avoid the connection not fastness which caused by the cold soldering, etc.
4. Heat auto recovery ability, amazing speed of temperature compensation to solve the contradiction in the lead-free soldering process of temperature, .
5. An essential tool for some specific soldering at low temperature.
YMK Soldering Iron Specification :
| Part Name | Specification | Description | |||
| nut | M11 | stainless steel | |||
| tip sheath | 8.5*43mm | stainless steel | |||
| soldering tip | 4*16.5mm | copper plus coating | |||
| hedging | M15*22mm | high temp materials | |||
| heater | HT-180 | silver wire wound | |||
| sensor | 2*85mm | K-type thermocouple | |||
| board | 10*50mm | fiberglass board | |||
| vibration switch | SW-18010P | temperature 100°C | |||
| hook spring | 0.8*86mm | stainless steel | |||
| handle | 20*110mm | ABS material | |||
| handle sheath | 22*40mm | Silica gel | |||
| wire sheath | 10*40mm | rubber | |||
| assembled wire | 1.2m | anti-scald silicone line | |||
| air plugs | GX16-6 | metal | |||
