Multiple Working Modes Intelligent Transfer Peristaltic Pump

1. CR peristsaltic pump SG600LC can be installed by YZ35, YZ35-13 pump heads.etc..
2. With both-way large torque, low power motor. It can be connected with several pump heads to satisfy the different demands of flow rates.
3. Long life, Touch screen control, easy to operate, 
4. Color LCD display in English and Chinese version 
5. Has RS485 communication interface, supports MODBUS communication protocol. And communication protocols customized is available.
6, with 4 work mode optional :  transfer /timer /quantitative/timing quantitative

 

Model	SG600LC/YZ35-13   YZ35	Display Mode	LCD
Speed Range	0.1-600 rpm	Control Method	touch screen+keypad
speed resolution	0.1 rpm	Suckback angle	10°~720° (1° Stepping)
Max Flow	12000ml/min	Suchback speed	10-300 rpm
Filling Accuracy	<±1%	Motor Type	Stepper motor
Environment Temperature	0-40℃	External control Start & stop, direction control, speed control ( Analog control :0-5v, 0-10v, 4-20mA optionl ) RS232 and RS485 Communication interface, support MODUBUS Communication Protocol
Relatively Humidity	<80%
Power consumption	<400w
Power supply	AC220V or  AC110V

 

 Function & Characteristics

 

 Intelligent peristaltic pump with 4 work mode optional :  transfer /timer /quantitative/timing quantitative
Friendly operation interface
Support multi-function selection
Can save 9 sets data that can help customer fastly find the original filling data .
Support RS485/RS232/MODBUS communication protocol , analog quantity control (0-5v 0-10v  4-20mA ...)foot switch control ,Offer multi Language customized .
Memory function available in case of power off and it will continue the work once the power was restarted.
Long-range control is available through the DB15 interface of the drive: speed control, start-stop control, direction control
Has the flow calibration function, suitable for higher precision transmission fluid.