This pump
series is a cantilever-type horizontal single-stage-single-suction centrifugal
pump. Its flow contact parts are made of steel-lined polyethylene with
ultra-high molecular weight (UHMWPE). The material is a new
corrosion-and-abrasion- resistant engineering plastic for the use of pump in
the world. Its unique features are good resistance to abrasion, good resistance
to shock (specially for low temperature shock), resistance to creep deformation
(resistance to crack resulted from ambient stress), and excellent resistance to
corrosion.
The pump is of remarkable characteristics: multifunction, i.e. the pump is
suitable for many working conditions. For example, it can be used in conveying
acid and alkali clear liquids or slurry, varieties of corros-ive mine slurries
of metallurgical industry, varieties of thin acids of sulfuric acid industry,
varieties of waste water of environment protection industry, etc. Because of
the resistances to corrosion and abrasion, it is widely used.
Brief Introduction To Main Technical Properties.
1.Model: UHB-ZK series
2.Characteristics: resistance to corrosion and abrasion, one pump for multiple
uses, suitable for acid and alkali clear liquids or slurries.
3.Structure:
(1) the pump body is made of steel lined with polythene with ultra-high
molecular weight polyethylene. Its lining thickness is 820mm.
(2) The blade wheel has two types: open -type and closed type. It can be
optionally chosen according to conditions of media.
(3) Seal: K-type dynamic seal.
4.Applicable media: sulfuric acid with concentration of less than 80%, nitric
acid with concentration of less than 50%, hydrochloric acid with various
concentration, liquid alkali, etc. It is used not only for clear liquid, but
also for slurry.
5.Main technical data: working temperature:-20,t;~ 80t; (for special
requirements and improved materials, the temperature can be up to 105). Inlet
diameter: d>32m m~0250mm Flow: 5-600 m'/h Lift: not more than 50m