Click image to view original image
HR-1000, the Low-power wireless transceiver data module is used as the wireless data transceiver in long-ranges, with the small size, weight and power consumption and good stability and reliability.
* AMR Automatic Meter Reading
* Wireless alarm and security systems
* Home automation
* Low power telemetry
* Wireless conference voting system;
* Sports training & competition;
* Wireless dishes ordering;
* Wireless POS, PDA wireless smart terminal;
* Electronic bus station and intelligent traffic;
* RF transmitter Wireless electronic display screen and queuing machine;
* Wireless telemetry Charging for parking, parking lot;
* Wireless modem Automobile inspection and four-wheel orientation;
* Wireless sensor Industrial wireless remote control and air conditioning remote controller;
* Observation and predication of oil well and hydrological information;
* Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system;
Technical specification of HR-1000 module:
Serial number Item Parameter Note
1 Modulation mode FSK
2 Work frequency 433MHz 315/868/915MHz is possible
3 Transmission power < 10mW
4 Transmitting current < 35mA
5 Receiving current < 11mA
6. Sleeping current < 3uA
7 Receiving sensitivity -110dBm(1200bps)
8 Channel amount 8 channel User setting
9 Working temperature -20~+65 deg; C
10 Working humidity 10%~90%(relative humidity without condensation)
11 Antenna impedance: 50
12 Power supply +5V
13 Dimension 38*25* 6mm
14 Interface TTL
15 Reliable transmit distance 100m
Features:
1. Power and receiving sensitivity
The transmission power is < 10mW, Receiving sensitivity: -110dBm,
Transmission current< 35mA, Receiving current< 10mA, sleeping current < 1uA.
2. Modulation mode and Frequency
Modulation mode: FSK, Frequency: 433MHz. Also, capable of 315MHz, 868MHz and 915MHz.
3. High anti- interference and low BER(Bit error Rate)
Based on the FSK modulation mode, it adopts the efficient communication protocol. The actual bit error rate of 10-5 ~ 10-6 can be achieved when channel bit error rate is 10-2.
4. Long transmission distance
Within the range of visibility, the reliable distance is(BER=10-3/ 1200bps) >150m when the antenna height is greater than 100m (BER=10-3/9600bps).
5. Transparent data transmission
Transparent data interface is offered to suit any standard or nonstandard user protocol. Any false data generated in the air can be filtrated automatically (What has been received is exactly what has been transmitted). The change time between receiving and sending is < 10ms.
6. Multi- channel
The standard HR-1000 configuration provides 8 channels to meet the multiple communication combination mode of the user.
7. High speed wireless communication and Large data buffer zone
When the RF baudrate is bigger than COM baudrate, allowing to transmit unlimited length data at one time, when the RF baudrate is smaller or equal to the COM's, allowing the transmission of 255 Bytes data.
8. Intelligent data control and the user doesn't need to prepare excessive programs
Even for semi duplex communication, the user doesn't need to prepare excessive programs, only receiving/transmitting the data from the interface. HR-1000 will complete the other operations automatically, such as transmission/receiving conversion in the air, control, etc.
9. High reliability, small and light
Single chip radio - frequency integrated circuit and single chip MCU are used for lessened peripheral circuits, high reliability, and low failure rate.
10. Watchdog monitor
Watchdog monitors the inner function, it changes the traditional product structure and also improve the reliability of our modules.
Contact: Mr Jet Zhang
Tel: 86 755 81782516
Mobile: 86 ( 0 ) 158 138 56667
Fax: 86 755 23007123
E-mail: sales@ohglrf.com
MSN: jetzhangcn@hotmail.com
Skype: jet20071204
Company: Oriental Huaray Group Limited
Add: Floor 2, Building A, Huaxia Industrial Park, Guangming Road, Shiyan BaoAn district, Shenzhen 518108, China
Website: www.ohglrf.com
