Click image to view original image
Equipment name：(DN1-DN2)*L two-dimensional gantry-type winding machine
Note: When ordering, please specify the range of DN1 (minimum diameter of product), DN2 (maximum diameter of product), L≤6000mm
Equipment composition: gantry-type track, drive spindle, moving tailstock, winding trolley, dipping system, guide roving and creel.
Scope of application:
It is suitable for the production of FRP pipes with diameter Ф10-1000mm and length not longer than 6000mm.
According to the user's requirements, the equipment can meet the production of unsaturated polyester resin and epoxy fiberglass pipe.
The equipment is suitable for production of pipes of different fiber types: ordinary glass fiber, carbon fiber, aramid fiber and basalt fiber
Main parameters and characteristics:
1. Product diameter: Ф10mm-Ф1000mm
2. Product length: ≦6000mm
3. Winding angle：≥45°≤89° (When the pins are hung on both ends of the mold, the winding machine can meet ≥0°≤90°)
4. Roving-drawing speed：≤100m/min
5. Main shaft speed：≤78rpm.
6. Trolley speed：60m/min.
7. Control method:Spindle, trolley dual servo + digital control system
8. Resin tank: Equipped with heating function to meet the production of epoxy resin products
9. Creel: Users can choose from the following three types according to different product requirements.
Simple tension creel
Mechanical tension creel
Electronic tension creel
10. Total equipment power：15KW±5KW
11. Equipment occupied area: Width:10000mm, Length:8600mm (The product length is 6000mm).
Equipment Name: Gantry-type Winding Machine
(DN1-DN2)*L three-dimensional gantry-type winding machine
Note: The range of DN1 (minimum diameter) and DN2 (maximum diameter) should be stated when ordering. L’s range: L≤6000mm
Product composition: The main components of the winding machine are: winding machine gantry track, drive bed head, tail frame, winding trolley, resin tank, roving guide roller or arm feed and creel
Scope of application:
It is suitable for the production of FRP pipes with diameter Ф10-1000mm and length not longer than 6000mm.
According to the user's requirements, the equipment can meet the production of unsaturated polyester resin and epoxy fiberglass pipe.
The equipment is suitable for production of pipes of different fiber types: ordinary glass fiber, carbon fiber, aramid fiber and basalt fiber
Main parameters and characteristics:
1. Product diameter: Ф10mm-Ф1000mm
2. Product length: ≦6000mm
3. Winding angle: ≥45°≤89° (When the pins are hung on both ends of the mold, the winding machine can meet ≥0°≤90°)
4. Roving-drawing speed: ≤100m/min
5. Main shaft rotation speed: ≤78rpm。
6. Trolley speed: 60m/min。
7. Control method: Three-axis linkage servo + Advantech Industrial Control (Taiwan Industrial Control) + Digital Control System
8. Winding software: (semi) sphere, cone, cylinder, (semi) ellipsoid combination
9. Resin tank: Equipped with heating function, can meet the production of epoxy resin product
10. Creel: Users can choose from the following three types according to different product requirements.
Simple tension creel
Mechanical tension creel
Electronic tension creel
11. Total equipment power：20KW±5KW
12. Equipment occupied area: Width:10000mm, Length:8600mm (The product length is 6000mm).
Equipment Name: Gantry-type Winding Machine
(DN1-DN2)*L four-dimensional gantry winding machine
Note: The range of DN1 (minimum diameter) and DN2 (maximum diameter) should be stated when ordering. L’s range: L≤6000mm
Product composition: The main components of the winding machine are: winding machine gantry track, drive spindle, tailstock, winding trolley, resin tank, roving guide roller tipping, arm feeding and creel
Scope of application:
It is suitable for the production of FRP pipes with diameter Ф10-1000mm and length not longer than 6000mm.
According to the user's requirements, the equipment can meet the production of unsaturated polyester resin and epoxy fiberglass pipe.
The equipment is suitable for production of pipes of different fiber types: ordinary glass fiber, carbon fiber, aramid fiber and basalt fiber
Main parameters and characteristics:
1. Product diameter: Ф10mm-Ф1000mm
2. Product length: ≦6000mm
3. Winding angle: ≥0°≤89°
4. Roving-drawing speed: ≤100m/min
5. Main shaft rotation speed: ≤78rpm。
6. Trolley speed: 60m/min。
7. Control mode: four-axis linkage servo + Advantech industrial control (Taiwan industrial computer) + digital control system
8. Winding software: (semi) sphere, cone, cylinder, (semi) ellipsoid combination
9. Resin tank: Equipped with heating function to meet the production of epoxy resin products
10. Creel: Users can choose from the following three types according to different product requirements.
Simple tension creel
Mechanical tension creel
Electronic tension creel
11. Total equipment power：22KW±5KW
12. Equipment occupied area: Width:10000mm, Length:8600mm (The product length is 6000mm).
