PostYou are now at: Home » Products » Machinery » Mineral Machinery »

5X sand making machine

Click image to view original image
Brand: zoomlegend heavy industry
Rotary Speed: 1700-1900r/min
Double Motor Power: 110-150KW
Best Feeding Size: 35mm
Price: 6800.00USD/set
Min.Order: 1 set
Supply 120 set
Delivery: Shipment within 25 days since the date of payment
Address: China
Valid until: 2021-01-17 [Expired]
Updated on: 2020-03-30 20:54
Hits: 17915
Company Detail
 
 
Details

Product Introduction

5X sand making machine is a machine by way of impact crushing, widely applied for primary and fine crushing (sand making) of hard and crisp materials like rocks, abrasive materials, refractory materials, cement clinker, quartz, iron ores, concrete aggregates, etc. It's especially suitable for construction and road building. Impact crusher is featured by simple structure, low price, stable operation and highly effective energy saving. The impeller and materials self-lining in the vortex crushing chamber greatly reduce the cost of abrasive components and maintenance workload. It effectively solves the "iron pollution" and the "steel jam" and the inner airflow self-circulation eliminates the dust dispersing.


Working Principle

Materials enter into the crushing chamber of 5X sand maker through the feeder and impact with those distributed around the impeller in the form of an umbrella under the action of centrifugal force. Then, in the strong vortex between the impeller and the case, the materials impact, rub and crush with each other for many times. At last, they will be discharged from the lower outlet of 5X sand making machine.


Performance Characteristics

1. After the optimization of the deep chamber rotor, the output is increased by about 30%.

2. After partial abrasion of guard board, it can be used upside down which will increase the utilization ratio of materials and the operation life span by more than 48%.

3. The only thing to do is to renew the abrasive hammer because of combined hammer design which can decrease the operational cost by more than 30%. In addition, the auxiliary hammer is added to effectively avoid the abrasion of vertical plate.

4. The core wear-resistant materials adopt wear-resistant and thermostable materials used in important industries in America.

5. Rhombus impact block is used to avoid the abrasion of vertical plate after the impact of materials.

6. The bearings are all international brand from Japan, Sweden, America, etc.

7. The best emission outlet and more smooth inner curve design makes it possible to reduce the flow resistance of materials and greatly improve the output.

8. Distribution table for dual purposes is easy to operate which can achieve shift between two ways of feeding.

9. The lower part of the main bearing is specially sealed to ensure that there is no grease seal and grease leakage.

Technical Parameters

Model

5X7615

5X8522

5X9532

5X1145

Capacity (t/h)

Fall and Center Feed

150~280

240~380

350~540

500~640

Center Feed

70~140

120~200

180~280

250~360

Best Feeding Size (mm)

Soft Materials

35

40

45

50

Hard Materials

30

35

40

45

Rotary Speed (r/min)

1700~1900

1500~1700

1300~1510

1100~1310

Double Motor Power (Kw)

110~150

180~220

260~320

400~440

Outer Dimension L×W×H (mm)

4100×2330×2300

4140×2500×2700

4560×2600×2900

5100×2790×3320

Weight (t)

12.1

14.8

18.6

27.5

Power

380V, 50Hz

Thin Oil Lubrication Station

Double Oil Pump Motor Power

2×0.31Kw

Safe Protection

Complementary Oil Filling; Automatic Halt With No Oil Flow; Water Cooling; Warm Start of Motor in Winter

Fuel Tank Power

2Kw

Outer Dimension L×W×H (mm)

820×520×1270


Total: 0 [Show All]  Related Reviews
 
More »Our Others Products

[ ProductsSearch ]  [ Add To Favourite ]  [ Tell Friends ]  [ Print Content ]  [ Violation Report ]  [ Close Window ]