Click image to view original image
The rate of the biomass pellet production line is figured out by the raw materials utilized. For instance, if the raw materials are branches and also trunks with high moisture web content, they should be cracked - smashed - dried out - granulated - jam-packed - shipped. It generally depends upon what basic materials are used. 350 kind biomass pellet machine equipment 38,000, design: 350 type 300 ~ 500 kg per hour, 450 type 500 ~ 800 kg, 560 kind 1 ~ 1.5 bunches, 600 kind 2 tons, 850 type 3 ~ 4 heaps.
The good selling in Indonesia biomass pellet production line rate depends upon your raw materials and also result dimension. Firstly, you require to recognize what your basic materials are. The raw materials are prefabricated sawdust or wood chips and also the dampness content of the materials is 10%-15%. A manufacturing facility used new modern technology timber pellet device is enough. If your raw materials are unrefined logs, branches, and so on need to be pulverized by a wood chipper and biomass crusher, then dried out in a clothes dryer (if the wetness surpasses 15%, it needs to be dried out), after that the primary device is granulated, and then the packaging equipment loads this set of assembly line.
Recognizing your basic materials has to do with the outcome. The result of the RICHI biomass pellet mill machine is various and also the design is different, so the rate is additionally various. The biomass pellet assembly line rate is not just a matter of reporting a number, but it is necessary to develop a plan as well as quotation according to your requirements.
Firstly, the raw product wetness demands of timber pellets are very stringent. The dampness material of the product is too expensive, which blocks the die holes, to make sure that the fragments can not be generated; if the moisture material of the product is too reduced, if it is as well dry, it is not easy to form, and also the viscosity is inadequate.
Related case: 5T/H biomass wood pellet factory in Austria
Usually 12%-13%, 15-20% of the raw product moisture after inflection is the requirement for pressing timber pellets. If the raw product dampness is too high, the mold and mildew resistance and also sliding sensation will certainly happen after the raw material goes into the biomass pelletizer ring die; take notice of control the dampness material of the raw product prior to going into the biomass pelleting maker, If the water material is too expensive, there will be slippage in the ring pass away, causing the sensation that it is not easy to release.
If your resources wetness satisfies the demands, a biomass timber pellet press machine can produce wood pellets. If it does not meet the demands, it requires to be dried out, so it requires to be equipped with a timber dryer and also a warm blast oven. Certainly this is if your basic material is timber chips. If your raw material is wood chips ( density less than 0.5 mm), it needs to be crushed, which amounts including another procedure. Some consumers' basic materials are bark, which is also possible after including a wood pulverizer.
Nonetheless, some clients' raw materials are wood scraps, due to the fact that the price of timber scraps is cheap and also very easy to get, so there are several situations, then it is needed to add a timber chipper, first to reduce the non-standard timber scraps right into wood chips, and then most likely to crush.
For details please contact: Richi Machinery
WhatsApp：86 138 3838 9622
Email：enquiry@pellet-richi.com
For some customers whose resources are waste structure layouts, it is required to transform the wood chipper to a bamboo plywood crusher.
Since the bamboo plywood itself has numerous iron nails, it is very simple to harm the knife on the timber chipper when making use of a wood chipper. An additional reason is that the waste building template is reasonably wide, as well as the feed port of the timber chipper is typically 1250px.
It is difficult to manually break it beforehand, right? The bamboo plywood crusher can get in any kind of bamboo plywood with a feed opening of less than 1.25 m, and also the gnawing knife of the bamboo plywood crusher is an ingot blade, and the iron nails have little result on him.
Unlike wood chippers, the blades are quickly damaged. Bamboo plywood is additionally an benefit of making wood pellets. Usually, its wetness web content is very small, between 15-20%. Consequently, making use of bamboo plywood as pellets saves the difficulty of timber drying out makers.
