Click image to view original image
1760mm Toilet Paper Making Machine
The main parameters:
Output Paper: Toilet /napkin /tissue/ kitchen paper
Raw Material: Raw Pulp, Waste Paper, Inferior CottonWoodStraw, Wheat Straw Hood and Bamboo
Structure: Single-dryer&single cylinder mould
Output Weight: 10-35G/M2
Paper Trim Width: 1760mm
Working Speed: 80----250m/min
Capacity: 5 tonnes/24hours
Rail Gauge: 2600mm
Driving Mode: Section drive, AC frequency conversion speed
| The main structure of the paper machine: | |||
| Main structure | Equipment | Specification | Quantity [Piece(s)] |
| cylinder section | cylinder mould | 1500mm× 2200mm, stainless steel |
1 |
| Cylinder pressure forming machine | 1 | ||
| couch roll | φ 400× 2350× 2900mm, rubber coating hardness HSD 38° C± 2 |
1 | |
| dryer section | dryer | φ 2500× 2200× 2900mm, alloy | 1 |
| touch roll | φ 550× 2350× 2900mm rubber coating hardness HSD 90° C± 2 |
1 | |
| winding section | cold cylinder | φ 900× 2200× 2900mm | 1 |
| fly rubber roll | 280mm× 1950mm rubber coating hardness HSD 75° C± 2 |
1 | |
| rewinding& perforating machine |
1760mm | 1 | |
| paper cutting machine | 1 | ||
| The equipments of the paper making machine: |
|||
| List | Quantity [piece(s)] |
Motor (kw) |
Quantity [piece(s)] |
| 1760mm toilet paper host machine | 1 | 37 (adjustable speed) |
1 |
| dryer(double layer) | 1 | ||
| Φ 800mm ventilator | 1 | 5.5 | 1 |
| Model-15 roots vacuum pump | 1 | 22 | 1 |
| suction box | 4 | ||
| 5m³ high thick hydrapulper | 1 | 55 | 1 |
| Φ 380mm double disc pulp refiner | 2 | 37 | 2 |
| Φ 700mm agitator | 4 | 11 | 4 |
| 606 sand remover | 12 | ||
| 0.6m2Up-flow Pressurized Screen | 1 | 40 | 1 |
| 8 inch pulp pump | 2 | 22 | 2 |
| 6 inch pulp pump | 6 | 2.5 | 6 |
| air pump box | 1 | 5.5 | |
| 6 inch water pump | 2 | 4 | 1 |
| fequency conversion controller | 1 | ||
| 1760mm rewinding & perforating machine | 1 | 2.2 (adjustable speed ) |
1 |
| paper cutting machine | 1 | 1.5 | 1 |
| After Sale Service: 1) Within warranty period, if our products cause any errors or quality problem, we promise to repair or exchange the product as soon as possible. 2) Depend on the client’ s enquiry, our engineer would upgrade and improve the equipment. 3) We set up the equipment or the whole production line to our clients. Promising our equipments successfully operate and create paper products. 4) Without extra charge, we train your employees how to adeptly operate the equipment. 5) Any time and any place, our engineers will come to you, help you on any technical problems. 6) According to client’ s request, we provide the technical services and site services 7) Once client purchased our products, we would create a personal file of the clients for our further services |
