Click image to view original image
1092mm Kraft paper making machine
Technical parameter:
Raw material: Recycled paper, waste paper, wood pulp
Output paper: Paper board, double liner paper
Output weight: 80-350G/M2
Capacity: 6-8T/D
Trim width: 1200mm
Working speed: 80---500m/min
Rail gauge: 1800mm
Drive way: AC inverter speed, section drive
Main structures
Cylinder section:
Φ1250mm× 1450mm× 1800mm stainless steel cylinder mould 5 sets, Φ400mm× 1450mm× 1800mm couch roll 6 sets, reverse roll 1set, coated by rubber, rubber shore hardness 38° C± 2. Pneumatic device.
Press section:
Φ450mm× 1450mm× 1800mm natural marble roll 2 sets, Φ400mm× 1450mm× 1800mm rubber roll 2 sets, coated by rubber, rubber shore hardness 90° C± 2. Pneumatic device.
Dryer section: Φ1500mm× 1450mm× 1800mm alloy dryer 4 sets. Equipped with Dryer mesh
Drive section: Equipped with 400 reducer 2 sets. AC frequency conversion speed, adjustable speed
| Equipments | Qty(set/sets) |
| 1092mm paper making machine | 1 |
| ventilator | 1 |
| dryer exhaust hood | 1 |
| Model-15 roots vacuum pump | 2 |
| Suction box | 5 |
| 1092mm winding machine | 1 |
| 1092mm rewinding machine | 1 |
| Frequency control cabinet | 1 |
| Work bench | 1 |
| Air pump | 1 |
| 2 tons boiler | 1 |
| Pulping Equipments | Qty(set/sets) |
| 2m ³ or 3 m ³ hydrapulper | 1 |
| 0.9m ² or 1.8 m ² high frequency vibrating screen | 1 |
| 5m ² cylinder pulp thickener | 1 |
| bleacher | 1 |
| Φ 250mm pulp refiner | 2 |
| Φ 700mm Agitator | 5 |
| 606 low consistency sand remover | 6 |
| pulp pump | 6 |
