Click image to view original image
straightening machine
Technical parameters of GTB series:
The steel bars diameter of cut off is 5-12mm. Single raid cut-off strip number is 1-9999900. The steel bars length of cut off is 1.5-9mm. Using power is 380 volt/50hertz three phase alternating current (交流电). The line speed is 50 m/min. Electrical machinery power is 15kw.
The features of GTB series straightening and cut off machine:
GTB Series reinforced straighten cutter is After years meticulously developed generation tech products has efficient, energy, materials, Festival workers reasonable structure etc. significant characteristics, ranking leading domestic level.
1.Control: Equipment world most advanced de lee xi electric power control system, overload, owes load, phase missing, short circuit, overheating comprehensive protection, length counting, boot, stop, all automation, this machine boots after length and output, so can automatically complete rectifies shear and counting etc. It can automatically engine off after complete output, just need one operation. Can greatest limit workers’ wages.
2. Cut off use hydraulic pressure follow-up cut off technology. Not only saves a lot of tool wear, but also basically stop the phenomenon that even cut and uncut-off. It not resulting short - breakage steel bars, and cut accurately, the material waste is zero. The material left rate up to 100% than normal straightening cutter’s 98%. Just this can save 2-3 million for a manufacturer which produce 1000 tons steel bars per year. It is tallying the requirement of environmental protection with its small noise.
Straightening rollers: It introduction of German high-technology balance of technology to produce a series of straightening machine (the only one use the technology to produce straightening machine) Its degree of straightening roller micro-balance achieve to 99%, the drum rotational speed is the general tone straightening machine 2-3 times, 50 meters per minute, with power generally 2-3 times Straightening Machine, classes yield up to 10 tons, and when the machine is working, low noise and small vibration, can continue working without stop working.
Process: Using hyperbolic curve structure straightening rolls, ensure that when the machine straightening the cold rolled ribbed steel bar, can greatly product geometrical shape of the material surface and mechanical property, without compromising the ribs,
rectifies range wide and can be straightening ¢ 4 – 12 millimeter of wire, cold drawn low-carbon steel wire, high strength steel wire, cold rolled ribbed steel bar and so on. Straightening effect is well. The steel bars that rectifies straightness to be high, is less than 2 millimeter/meter, has no scratches the surface.
Energy consumption: The line speed is 80-100 meters/minute, it is 2-3 times than the same normal driving force straightening machine, not only to adapt to the needs of mass production, electricity and the relative wages per ton of materials only about one-half or one third than other manufacturers.
The technical parameter of GTC6-12 series:
Straightening and cut off steel bar diameter is 6-12mm, straightening and cut off steel bar speed is about 80m/min. The length error of cut off steel bar is ±5mm. The electricity machine for straightening hauling is 18kw, n=1460r, the electrical machinery for hydraulic pressure cut-off is Y132S-6, N=3kw, n=960r Y132M-1.6, N=4kw, n=960r. External dimensions (long × wide × high) main engine is 3260×780×1255mm. The hydraulic pressure cutting is 1020×880×1070mm, main engine power. Expected the external dimension (9 meter) is 8660×450×980mm. The entire unit weight (does not put coil including Shan Bi) is about 1700kg.
