Click image to view original image
Su Jiang advantages and principles of energy-saving lamp
Energy 40% About
In one sentence : Ensure that the case of the original brightness reduces power .
Through a common role in three energy :
1 , Ordinary halogen lamp light-emitting material is calcium phosphate, low luminous efficiency shortcomings, Jiang Su using rare earth trichromatic phosphors.
2 , Ordinary inductive power 8W , Su Jiang electronic ballast consumes 3W .
3 , Frequency 50KHZ , Electricity conversion rate.
Brightness increase 10%
28W Su Jiang energy-saving lamps in the energy 40% Is also based on the inductance than the average fluorescent light 10% , In fact, we can do energy 42% , The same brightness, but the only energy but also improve the brightness.
Color of increased
Also used rare earth trichromatic phosphors results. Color Rendering: We buy clothes at the mall, sometimes in the store to see the color under the sun and then found that the color has changed, stating the color, that if the mall has three color lights are no problem.
Wire would not heat, to reduce fire incidents
General inductor current fluorescent lamp 0.435A Su Jiang energy-saving lamp current only 0.135A
0.435 = 0.135 * 3.2
Tube surface temperature decreased 5 Degree
Magnetic ballast high heat, the maximum energy to "The/span> 80 Degree, the basic non-electronic ballast heat.
Magnetic ballast tube temperature = Electronic ballast tube temperature + 5 Degrees.
Q: Imagine if in the summer, the indoor temperature down 5 Degrees, the number of air conditioning can save electricity
Green Environmental Health
Output frequency up to 48KHZ , No strobe hazards, protective effect on vision; materials using solid-mercury technology, environmental pollution, therefore, Jiang Su Science and Technology T6 Energy-saving lamps are of green health products.
