optical switch fiber

optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patent pending opto-mechanical proprietary configurations and activated via an electrical control signal. The switch offers ultra-high reliability and fast switching speed as well as bi-directional performance. The optical switches are true switching solutions for optical networking applications.
Parameter  Single Mode Switch  Unit
  2x2 Add/Drop Full 2x2 
Wavelength Range   1270 – 1350 and / or 1525-1610   nm
Insertion Loss  Max  ≤0.8 ( 1.0 for dual band)  ≤1.0  dB
Switching Time  Max  7.5   ms
Wavelength Dependent Loss  Max  0.35   dB
Cross Talk  Min  -55   dB
Polarization Dependent  Max  0.1   dB
Repeatability  Max  ±0.05   dB
Optical Return Loss  Min  -55   dB
Switch Type   Latching / Non-latching   
Input Optic Power   ≤ 500   mW
Control Pulse Width   ≥ 20   ms
Cycle Rate   ≤10   Hz
Life Cycles (Durability)   10 Millions   
Operating Temperature   0 ~ +65   ℃
Storage Temperature   -40 ~ +85   ℃
Switching Voltage   4.5 ~ 5.5   V
Switching Current   45 ~ 55   mA
Interface Driver (Optional)   Voltage Edge Triggered or Level Controlled   
Fiber Type   Corning SMF-28   
Dimension   43.5(L) x 18(W) x 10(H)   mm