Click image to view original image
[Introduction]
1.Its in-bed scale system increase efficiencies by taking accurate weight readings with the patient in any position.
2.Integral Patient Bed Exit Alarm, audible alarm if the patient exits the bed.
3.It addresses patient safety with low bed height, full coverage side rails.
4.Its architecture support surface designed provides the flexibility to choose the most appropriatepatient surface.
5.Patient will feel very convenient while be on drip or used the heart monitor since it won’t need to change patientposition when the bed back section rise and low.
6.Hydraulic pump enables height adjustment, trendelenburg position with hands free
[Standard Function]
1.Detachable head and foot board
2.Four independence motors from LINAK
3.Weight readings system
4.With I.V.pole
5.With Drainage bag hooks on both sides
6.Control hand held, can hook on the side rails
7.CPR handle
8.Electronic function Lock at end of foot panel, nurse control (optional)
9.Bed surface with soft connection
10.Water proof mattress high density foam (optional)
[Technical Specification]
1.Full Length 2150mm
2.Full width 1030mm
3.Maximum safe load 250kg
4.Accuracy of measurement 0.1kg (Optional 0.05kg 0.02kg)
5.Bed base height range maximum height 750mm
6.maximum low 500mm
7.Bed base angle position adjustable Back section 0°~80°
8.Knee section 0°~40°
9.Trendelenburg 0°~12°
10.Patient touching surface 900*1950mm
11.Castor diameter 150mm
QUALITY CONTROL
Control from production process:
•All process would be supervised under inspection department
•7 stages pre-treatment meet international standard
•Baking at high temperature after power coating to ensure the paint finish
Control from material:
•All bolts and screws are of SS material
•Mild steel ERW rectangular tubes or sheets 1.2-2.0mmthickness, meet EU standard
•Plastic material is of ABS only. Durable and Sturdy. At least 10 years lifetime. Different colors for options.
Control from inspection:
•Process inspections after cold working, acid washing,powder coating and assembling
Final inspection before loading in random checking
•SGS third party inspection available if required
After sales service:
•We respect your feed back after receive the goods.
•We provide 12-24 months warranty after goods arrive.
•We promise all spare parts available in lifetime use.
•We respond your complain within 48hours.
