Acid-proof cement mortar, oil and cement mortar, cement mortar

First, the performance
1. Fineness: 4900 holes / cm 2 square hole sieve is not more than 15%.
2. Not earlier than 30 minutes of the initial setting and final setting later than 8 hours.
3. Acid is greater than 95%.
4. Kerosene absorption rate of not more than 10%.
Bending strength of not less than 5.28 days 1.96Mpa.
6. Air-curing, room temperature, acid, boiling acid stability is good.
Second, the purpose and use of
1. This product has a high temperature, high strength, high oxidation resistance, low cost advantages.
2. This product can be used in chemical, petroleum, metallurgy, machinery, paper, textile and other industrial equipment in the construction of acid in the acid corrosion of equipment by the foundation, acid storage tank, pickling tank workshop floor, trench, and a gaseous corrosion of buildings lining the smoke can be used to prepare acid-acid brick masonry cement sheet, etc.; can be mixed with crude acid increases bone (stones) acid and fine aggregate (sand) and other acid-resistant concrete preparation.
3. This product does not apply by hydrofluoric acid, fluoride acid, 300