Air or Steam Condensate Recovery System Power Trap 0.03 - 1.05Mpa

Air or Steam Condensate Recovery System Power Trap 0.03 - 1.05Mpa HP30

Quick Details:

Model: HP30

Max. flow rate: 7t/h

Connections: screwed, flanged

Dimmensions:

Screwed: L=580  H=620  W=430

Flanged: L=650  H=720  W=430

Dimmension: condensate inlet Φ80  outlet:Φ50  Motive medium inlet and exhaus port:Φ25

Max. operating pressure: 1.05MpaG(gauge pressure)

Max. operating temperature:185

Motive medium pressure:0.03-1.05MpaG

 

Motive medium: steam, compressed air, nitrogen or other non-flammable, non-toxic gas

pumped medium: steam condensate, water or other non-flammable, non-toxic fluid with a specific gravity of 0.85-1.0

Filling head(mm): standard:630, Min.:459, 550

Steam or air consumption:per t/h condensate:1.7kg steam, 6m³ compressed air.

Pressure:Low Pressure

Power:Air or Steam                 

Material:Casting              

Temperature of Media: Low Temperature

Media:Steam, Water                 

Port Size:1" - 3"             

 

 

Specifications

Power Trap
Improve production efficiency, save energy, reduce water treatment cost
No electricity
Easy Installation or Repair

 

Model:

HP30

 

Features:

1. Discharging and recovering condensate can improve production efficiency, save energy, reduce water treatment cost, and fully utilize steam.
2. Eliminates water hammer, avoids equipment damage, and improves the reliability and safety.
3. Effectively recovers condensate, reduces the cost of boiler fuel and water treatment for reuse, and that of down stream water treatment and drainage.
4. Recovers condensate with temperature of up to 185without evaporation.
 

5. No need for electricity, reliable operation, and easy for installation and maintenance.