Click image to view original image
Feature
1. Brushless Motor powerful enough to bear 2X250KG gates.
2. Easy install since the Drive system has been installed before leaving the factory
3. CE approved
Standard Configuration
1. Micro-controller
2. Brushless DC Motor
3. Hanger sets
4. Rear wheel
5. 2 pieces 24G Sensor
6.Track
7. Cover
8. End stop
9. Door bracket
10. Belt connection
11. Belt tensioning device
9. Door bracket
10. Belt connection
11. Belt tensioning device
Specification
Caterly F-250W
Weight of gate Single/Bi-part1X250KG/2X250KG
Width of gate Single/Bi-part 900-3000MM
Master Controller32 digital microprocessor
Brushless motor 100W
Opening speed300-700mm/s
Closeing speed300-650mm/s
Max open strength150N
Hold Open Time/Lock0-10S/30s
Height of the rail 8CM
Deepth of the rail16CM
Power Supply AC80V-250V 50/60HZ
Temp -15 C to +55 C
Power Consumptionaround 100W
4200mm track Broadband Voltage 80V to 250V Automatic Glass Sliding Doors operator
Function Programs
Off
Automatic
Permanent Open
Partial
Exit only
-----------------------------------------------------------------------------------------
Additional
Low noise desigh (<50db)
One million times of tests passed
Warranty: 24months
One million times of tests passed
Warranty: 24months
Emergency Functions
Emergency opening in case of power failure / Fail-safe
Obstacle detection with automatic return mechanism
Self monitoring light barriers
Slow speed search for obstruction
