PostYou are now at: Home » Products » Electrical & Electronics »

IP67 Waterproof Low Configuration LED DRL Lights With Fog Light Covers DC 12V

Click image to view original image
Brand: WINAUTO
Price: 1000.00USD/Piece
Min.Order:
Supply
Delivery: Shipment within 3 days since the date of payment
Address: China
Valid until: Never Expire
Updated on: 2015-07-29 17:30
Hits: 2969126
Enquiry
Company Detail
 
 
Details

 

 

LED DRL Lights For Toyota Reiz or Mark X 2010 - 2013 , Low Configuration With the Fog Light Covers

 

Specification: 

 

1. LED Type: Cree

2. Efficient Power: 1 W

3. Lumen Flux: 1000 LM

4. Led Color: White

5. Current: 1.0 Amp 

6. Input Voltage: 12 DC

7. Waterproof: IP67

8. Warranty: 1 year

9. Life-span:Above 50000 hours 

10. Option beam:30°~60° (pencil~flood)

 

 Product Features

 

1. Drawing the driver’s attention in shorter time;

2. With LED light having longer (about 30 times) service hours than ordinary halogen lamp;

3. Less fuel consumption to save energy;

4. DRL conforms to ECE R87, but those that are of specific positions and functions should still be 

  subject to ECE R7 regulations;

5. Cooling fins with aluminum hulls can ensure the most proper temperatures while in operation or on 

  standby;

6. Protective loop with multi-functional drive can protect LED light from high voltage surges;

7. Offering a definitive leap for road traffic safety,  effectively preventing accidents by 58%;

 


Installation Manual

 

Please carefully read these instructions before installation, as incorrect installation may damage your 
car; if you are uncertain about the method of installation, please consult the dealer or professionals.
1. Ensure lights, air-conditioning system and other devices are all shut off before installation, and then open the engine hood;
2. Use proper tools to remove the front bumper and install the DRL to the proper position, and 
3. then fix the power box and the DRL properly;
4. Wiring Installation (refer to Wiring Diagram)
5. Check the harness of DRL control box, and then connect the yellow wire to the battery’s anode+,

and connect the white wire to head lamp’s anode+, and connect the red wire to ACC terminal and the black wire to the battery’s cathode;

 

Notice: ACC refers to the wire in the second part of key switch which used to energize the engine, you
 may find it in 3 positions:


A. One piece of ACC is in the key booster cable.
B. ACC fuse can be founded in the fuse box under the wheel pillar.
C. For some types of cars, ACC can be founded in the fuse box of engine chamber.


Check the harness of DRL and then firmly connect two connectors in the harness to control box connectors.

Pay attention to the direction of connectors: the harness plug at the side of lock catch should share the same direction with the control box jack.
Tidy up and fix overlong wires in car after connection; avoid tying wires at a position with high temperature (e.g. engine).


Use control settings are as below:
Switch-on and switch-off: insert the key to switch on ACC or the car, then the DRL automatically

powers on; the DRL will delay to power off after switching off ACC or the car (the delay time and

function depend on car type); when the head lamp turns on, the DRL will automatically become dim

(the dimming effect and function depend on car type).

 

 

Please send enquiry for us. 

 

 

Show Pictures

 

Total: 0 [Show All]  Related Reviews
 
More »Our Others Products

[ ProductsSearch ]  [ Add To Favourite ]  [ Tell Friends ]  [ Print Content ]  [ Violation Report ]  [ Close Window ]