Submerged Arc Welding Flux SJ101 for Steel Structure

SJ101 TECHNICAL DATA

(1)Standard:
AWS A5.17/5.23 F6A0-EL8 F6A2-EM12 F7A2-EM12K F7A4-EH14 EN760 SA FB 1 65 AC H5
(2)Description:
SJ101 is an agglomerated fluoride-basic type flux. It is gray and round grain,mesh 10-60. it can be operated with AC and DC. ,the welding electric current can up to 1200A.It has excellent weldability, the welding bead appearance is beautiful and the slag is easy to remove. The diffusible hydrogen content in deposited metal is less than 5ml/100g,so it has very good toughness at low temperature,therefore,crack resistance is extremely high. It is suitable for submerged arc twin-wire,tandom and multi-wire welding as well as for welding with the two-run technique.
(3)Applications:
It can be applied to different welding wires(such as H08MnA,H10mN2,H10MnSi,H08Mn2MoA,H08Mn2SiA etc.) It is fit for welding of low-carbon steel and low alloy steel. Such as oil storage tanks,pipeline steel,ships,bridges,pressure vessels,penstocks,boilers and H-beam structural steels.
(4)Chemical Composition(%)

SiO2+TiO2	Al2O3+MnO	CaO+MgO	CaF2	S	P
15-25	20-30	25-35	25	≤0.06	≤0.08

(5)Mechanical Performance of the Deposited metal (6)The Instruction of usages:

Redried the flux at 350 for 2 hours before use.

Remove the rust,oil and dirt from the surface of welding groove.

Welding Flux Picture

Applications

Factory Equipemt

Company Honor