Click image to view original image
must have edges blocked at the paint will not flow, it is required to have a border, or painting is that depressed. (Color according to customer requirements modulation different colors of paint)
Second, font color processing method: ⑴ screen: After the product font high light, to make the projections different font colors, screen printing methods may be used to achieve the font on the same plane can screen a variety of colors, you must complete each screen After a post-color printing and then oven dried before other colors. ⑵ Plating: Signs font high light after plating according to customer requirements in different colors (such as: black, gold, red, chrome) ⑶ painting (with the bottom of the painting method as mentioned above).
Third, font handling methods: ⑴ highlights: Also known as diamond plate surface paint knife to carve out (also known as batch flower, texture normal slope of 45 degrees, can do different lines according to customer requirements, usually along twill, Anti twill, arc lines, ruled, CD pattern, Sun Wen) ⑵ pull profiling: using pull profiling machine will pull out the label surface paint, texture can choose different mesh belt according to customer requirements. ⑶ sandblasting: There are a lot of professional audio products requires font sandblasting, this process more complex than the above two, the first after the entire label sandblasting, sandblasting oxidation treatment must, because some customers have requested the bottom color (such as black, blue) then you must sign into customers and then spray the entire desired color, after finished spraying dried, and then chemical solution wipe the surface of the paint font. ⑷ bronzing: first of all to Font surface polished to a smooth surface, then bronzing process. (This process is costly, rarely used).
Fourth, the installation: ⑴ signs with legs: The mold according to customer requirements foot long, foot diameter, center distance making, die-casting good signs, the signs will in itself comes with spikes, normal feet long 2-8mm, some big can also be done 2-13mm, such signs are mounted with a foot in many ways. A, the foot bends, fixed at the back panel. B, in the feet face collar .C, some big foot requirement itself is very thick, you can tap on the foot, directly on the screws and tapping. ⑵ no feet affixed adhesive label: can be attached to a different adhesive according to customer requirements, a common glue, 3M glue, Desha rubber, sponge rubber. Most customers are 3M adhesive commonly used. This type of installation is simple, after removing the release paper affixed directly to the family to stay, and some such as sound cough net. If the network is too large it does not fit with gum paste, because by the surface adhesive glue small, it's easy to take off. ⑶ with legs affixed adhesive: This type of design is the most customers: foot is used to fix the plate does not move, glue is fixed signs will not fall off, is also a function that is double insurance. ⑷ bottom plate punching: This is mainly through the nail plate fixed on the product, the more commonly used such furniture industry, other industries are rarely used, because some customers products are not nailed on the nail. (Such as iron, aluminum panel) ⑸ feet do not stick without glue: After the customer to get back, when you install itself as glue.
Nameplate production design artistry
To make a good nameplate, mainly reflected in the nameplate artistic design, including design, color design, the nominal design and process selection. In nominal performance capabilities of the premise, the means of aesthetic and artistic point of view the integration process throughout the design. The use of technology, materials and other conditions, which fully reflects the beauty of the product shape and color the United States, the product has a significant artistic features.
1, the ratio should be coordinated design, aesthetics, and both scientific and economic, that percentage should shape it is easy to accept, and ease of processing.
2, the color scheme should be in conformity with the product performance, coordination reasonable and focused.
3, in the nominal design, the pattern should be unique, the text should be clear and beautiful, in line with people's habits.
4, the designer should understand the process of processing, which is an important factor in the possibility of working in line with the desire to ensure product design. Different processing techniques can produce different decorative effect, but some entirely different process, can also produce the same decorative effect. This requires a clear understanding of the designer artistic effect can produce a variety of technical means.
