IEC 60529 DIN40050 And IP5K0 D

IEC 60529 DIN40050 and IP5K0 Dustproof Sand and Dust Test Chamber for IP5X and IP6X The Dustproof Sand and Dust Test Chamber SC-015 is according to IEC60529,Website:http://www.lisungroup-sh.com, GB2423.37-89 (Test L: dust test methods), GB 4208-93 protective casing grade (IP code), GB/T 4942.2-93(protective casing grade of low-voltage apparatus), GB 7000.1-1996, GB 7001-1986(protective casing grade of lamps), DIN40050 and IP5K0. The SC-015 is applied in LED or other luminaries for IP5X and IP6X test.  ModelNumberWorking Room Size(mm)RemarkSC-500600*700*800Single door structureSC-800800*800*800SC-0101000*1000*1000SC-0151000*1500*1000Cabinet can be put in a horizontal direct or vertical directSC-0201000*2000*1000 •  Temperature Range: environmental temperature + 5~50℃  (Adjustable)  •  Humidity Range: 45%~75% (Adjustable)  •  metal net standard nominal line diameter: 50μm•  Airflow velocity in the chamber: 1.5m/s (adjustable range 0~4.99m/s)  • Environmental air pressure: 85Kpa~106Kpa  •  Test dust: dry talcum powder, portland cement, smoke ash and etc.  •  Line spacing between the standard: 32μm, 75μm and 250μm (There are three metal nets)  •  Selecting dust concentration control instrument: get sample through the optical principle, show the dust concentration and automatic control powder quantity that entering into the Cabinet according to the concentration of the set: (needed cleaning compressed air source configuration, require the pressure: 1~3 kg/cm3)  •  Power supply: 380V 3phases 50 Hz/60Hz