IEC 61000-4-12 Ring Wave Gener

IEC 61000-4-12 Ring Wave Generator With 0~6KV Voltage Ring Wave Generator is the test equipment in conformity to IEC (the International Electro technical Commission) standard IEC61000-4-12,Website:http://www.lisungroup-sh.com, EN61000-4-12, ANSI-C62-41 and GB/T17626.12. This instrument is used for the simulative electrical network, the power supply of the reactive load and the control line switch, as well as sensing the ring wave of the low voltage cables terminal equipment caused by the disconnection of the power circuit, fault and insulation breakdown or lightning stroke. The RWG61000-12 series products have LCD display in both English and Chinese.Specification:ProductModelRWG61000-12RWG61000-12TRWG61000-12ARWG61000-12ATOutput Voltage0~4KV0~6KVVoltage/Current WaveOpen circuit voltage wave: frontier: 0.5μs±20%. Short circuit current wave: frontier: ≤1μs. Oscillation frequency: 100kHz±10%PolarityPositive, Negative or Positive/Negative automaticPhase ShiftAsynchronous, Synchronization 0°~360° or Specific AngleOutput Impedance12Ω, 30Ω, 50Ω ± 20%Coupling/Decoupling Network (CDN)Includes a 16A single phaseIncludes a 20A 3phases/5wiresIncludes a 16A single phaseIncludes a 20A 3phases/5wiresWorking PowerAC220V(Option 110V)±10%, 50/60HzDimension (DxWxH)44x45x35cm44x45x20cm 44x45x35cm(CDN)44x45x30cm 44x45x20cm(CDN)44x45x30cm 44x45x35cm(CDN)Gross Weightabout 28kgabout 46kgabout 45kgabout 48kgTouch screen with super big LCD and built-in Windows CE Waveform: