E-Class W212 S212 F 308613006 Mercedes Air Suspension A2123200825

Mercedes-Benz E-Class W212 S212 F 308613006 Mercedes Air Suspension A2123200825

 

 

Specifications

 

Type	Air suspension spring	Model NO.	504030
Car make	Mercedes-Benz	Package	Carton/Cartons
Position	Rear	Warranty	One year
Rubber type	Natural rubber	Place of origin	Guangzhou China(main land)
Manufacturer part NO.	F 308613006 , A2123200825 , A2123204025 , A2123202025 , 2123200825	Construction Year:	2006-2013

 

 

The Advantages of Air Spring

 

The two front tires bear the majority of braking and steering. Air spring ensures that weight is properly distributed to all four tires for optimal braking and steering. Progressive rate air springs significantly improve ride quality by better absorbing road inputs, while keeping your tires on the road for better handling.

 

 

The productive principle of Air spring

 

GUOMAT Air Springs are highly durable, precisely engineered and cost-effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs incorporating fabric-reinforced Wingprene™ or natural rubber flex-member construction and corrosion-protected end retainers, Air Springs provide superior quality and performance. As actuators, GUOMAT Air Springs can provide either linear or angular motion.

 

 

Why Choose GUOMAT

 

The Air Suspension Compressor supplies air for every piece of air equipment on the vehicle. GUOMAT suspension compressor allows the required amount of air to be dispersed to the bags. Customers benefit from our technological expertise and long years of experience .

 

Air connections are exactly the same spread as the valve of the original equipment of the vehicle. GUOMAT suspension compressor supports the air suspension system to provide a smooth and safe ride. GUOMAT has been developing and producing high-quality products in the field of air springs and air actuators.

 

 

The 8 steps to install a New Air Spring on Your Vehicle

 

Replacing a broken air spring may require the help of a mechanic, but you can cut down your expenses by simply installing it yourself.

 

1: Parking your car on a level surface then using the floor jack to lift it up. Place the jack stands underneath the vehicle for support.

2: Remove the wheels by detaching its lug nuts one by one. Use a wrench for this procedure.

3: Deflate the air spring by opening the air mouth on the top.

4: Detach the set of fasteners that secure the air spring in place. You can generally find these bolts on the control arm and under the hood. Keep in mind that the set of procedures for removing an air spring vary for each car, so make it a point to consult your owners manual to see exactly how yours is removed.

5: Remove the old air spring away from the shock carefully. If needed, use a spring compressor to make the remove easier. You may reuse the O rings connecting the air spring to the shock.

6: Put the new air spring on the place where you removed the old one.

7: Reconnect it to the shock using the O rings you removed earlier. Make sure you apply lubricant on them before putting them back.

8: Reattach all the components that you removed. Recheck if there are no missing bolts, nuts and fittings.