Click image to view original image
This Roll forming machine for roof profile is the special roll forming machine for steel sheet cold-form industries. It can continuous form the steel sheet according to customer`s requirement, automatically cut to length. This equipment has many advantages, just like high forming speed, low noise, stable transmission, easy operation, good look and so on.
Technical Parameters for Roll forming machine for roof profile
|
NO |
Item |
Para |
Memo |
|
|
1 |
Suitable material |
Type |
Color steel |
|
|
Thickness (mm) |
0.4-0.8 |
|
||
|
Yield Strength (Mpa) |
230-300 |
|
||
|
Width mm) |
1250 |
|
||
|
2 |
Forming Speed (m/min) |
20-25 |
Not including cutting time |
|
|
3 |
Forming main motor power(KW) |
3*4 |
Will be according to actual design |
|
|
4 |
Uncoiler hydraulic power |
3 |
Will be according to actual design |
|
|
5 |
Hydraulic station power |
2.2 |
Will be according to actual design |
|
|
6 |
Total power |
17.2 |
Will be according to actual design |
|
|
7 |
Power |
AC380V,50Hz,3 Phase |
According to customer |
|
|
8 |
Dimension (L×W×H, m) |
20×3×2 |
Will be according to actual design |
|
Components for Roll forming machine for roof profile
|
Name |
Model/Name |
Quantity |
Technical Description |
|
1.Decoiler system |
Arm type decoiler |
1set |
Arm-type, hydraulic expanding, hydraulic motor releases the sheet |
|
2. Main forming system |
Feeding guide device |
1set |
1. Roller material:No.45 steel with surface hard chrome painted. 2. Roller inner supporting structure type: column 3. Motor driving, the back/forward rollers driven by chain, part of upper/lower rollers driven by gear 4. Cutting blade material Cr12 quenched treatment |
|
Roll forming system |
1set |
||
|
Post-cutting device |
1set |
||
|
3. Output system |
Support table |
2 sets |
For supporting the finished plate, length in 2 meters for each set |
|
4. Hydraulic system |
1set |
Uncoiler and cutting system adopts separated hydraulic station |
|
|
5. Electric control system |
1set |
1. PLC Control, encoder automatic cutting in length 2. Operation stage: Touch screen+ button 3. AC frequency for adjusting the speed |
|
Working process for Roll forming machine for roof profile
Decoiler →Guiding system →Roll forming →Cut to length →Output the finished products
Packing and shipping about the Roll forming machine for roof profile
More about the Maxmach group
http://www.m-rollformingmachine.com
