Click image to view original image
This Steel floor deck roller machine is the special equipment for continuous rolling and cold-forming on steel sheet.
Steel floor deck roller machine adopts coiling steel sheet as the raw material, declination, then continuous rolling and cold
forming, automatically cut to the size and output the finished panel to the supporter.
The Steel floor deck roller machine adopts PLC control, AC frequency and speed adjusting technology, and it realizes the continuous automatically production,
therefore, it is really a new type of energy-saving and high-effective producing equipment for steel structure.
Technical Parameters for the Steel floor deck roller machine
Item
Parameter
Remark
Suitable Material
Type
Galvanized steel
Width(mm)
1250
Thickness(mm)
0.8-1.2
Yield strength(Mpa)
230-300
Coil capacity(T)
8
Forming Speed(m/min)
about 20m/min
Depend on final design
Roller Material
No.45 steel
With hard chrome painted.
No of Roller station
about 30
Depend on final design
Roller shaft diameter
about 90
Depend on final design
Cutting Model
Hydraulic cutting
Power source
Type
380V/3PH/50HZ
Main motor power(KW)
about 16
Depend on final design
Total power(KW)
about 23
Depend on final design
Machinery dimension
See layout
Components for the Steel floor deck roller machine
Name
Quantity
Description
Uncoiler with coil car
(capacity:8 t)
1 set
Structure: Arm-type
Expanding model: hydraulic
Releasing model: electrical
With ultrasonic control
Main machine
Guiding device
1 set
Roll forming system
1 set
Roller inner supporting structure: guide Colum
Post cutting device
1 set
Cutting blade material: Cr12 quenched treatment
Supporting table
2pcs
Dimension: 2*2m
PLC control system
1 set
MITSUBISH, Frequency
Hydraulic station
1 set
.Famous Chinese brand
Packing and shipping about the Steel floor deck roller machine
More about our MAXMACH group
http://www.m-rollformingmachine.com
