Matrix 4X4 DIP 1.4V SK-MT44A

Shenzhen Yomband Electronics Co.,Ltd is one of the top level China matrix 4x4 dip 1.4v sk-mt44a manufacturers and suppliers equipped with professional matrix 4x4 dip 1.4v sk-mt44a factory,Website:http://www.wqsilicone.in, we are always at your service.Matrix 4X4 DIP 1.4V SK-MT44ASUNKING (HONG KONG) LIMITED USER MANUAL4x4 HDMI MatrixMODEL NO.: SK-MT44AEnjoy the Vivid World!   IntroductionDear Customer:Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.Our series of HDMI Converter. Switchers, extenders, matrixes and splitters are designed to make your A/V device use more convenient, more comfortable, more productive and more cost-efficient.The 4x4 HDMI matrix can connect four HDMI signal sources with the four displays at the same time.It can easily and freely split or switch four HDMI signals on four displays or projectors which compatible with HDMI signal. In addition, when connect its ports with HDMI cable, it can amplify the HDMI signal. The equipment our company produced provide solution for the following applications: such as the place limited of noise, transmission distance and safety, data center control, information distribution, the presentation in conference room, teaching environment and corporate training places.1.Features:                                                        ●Four HDMI signals input to be independently distributed or switched to four displays which support HDMI signal input●Support HDMI 1.3 and HDCP1.4●Support true color 12 bit●Support Blu-Ray DVD24/50/60fs/HD-DVD/xvYCC●Support audio format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/DOLBY-AC3/DSD●Support signal timing reset●Support AWG26 HDMI standard cable, input up to 10 meters,output up to 20 meters●Input ports can be controlled by IR Remote Control ●Via RS-232 control, you can upgrade the software of the machine, the input and the output can be switched by computer●No signal loss●12V/3A Power Supply2.Physical interface diagram①INPUT1—INPUT 4：HDMI input②OUTPUT1—OUTPUT4: HDMI output③ON/OFF: Power switch④DIP：dial switch to switch software for upgrading⑤IR: used for the IR remote control of this machine⑥DC 12V：DC12V/3A power supply②Serial IR: matched with infrared receiver, it is used for control the machine②RS232：Control the machine via the serial port③Output1: the key of HDMI output 1④Output2: the key of HDMI output 2⑤Output3: the key of HDMI output 3⑥Output4: the key of HDMI output 4⑦IR: used for the IR remote control of this machine⑧L1-L4: Input signal Indicator L1----L4RS-232 settings:Baud rate………………………………………………………………………………………………………9600Data bits…………………………………………………………………………………………………………8Parity Check…………………………………………………………………………………………………NoneStop bits…………………………………………………………………………………………………………1Cyclic redundancy check……………………………………………………………………………………None3.HDMI 4X4 serial port instruction manual1.video switchCir +” ” cmd +EnterCmd value range： >=0 and <=ff1）4 outputs switch to the same input ：cir a1~a4+EnterFor example：Cir a4+Enter: All outputs switch to input 4 2）One to one switch ：cir f0+EnterFor example：cir f0+Enter：indicate output1->input1,output2->input2~output4->input43）all output++switch：cir aa+EnterFor example：cir aa+Enter：indicate output1~ouput4  the selected input make an addition switch4）all output - -switch：cir ab+EnterFor example：cir ab+Enter：indicate output1~ouput4 selected input make an subtraction switch5）single output- -switch：cir xc+Enter“x”value range 0~3，For example：cir 1c+Enter：indicate output2 selected input make an addition switch6）single output++switch：cir xd+Enter“x”value range0~3，For example：cir ,1d+Enter：indicate output2 selected input make an subtraction switch7）Any output switch to any input：cir xy+Enter“X” value range 0~3，”y” value range 0~3For example：Cir 03+Enter: indicate output1 switch to input4Cir 12+Enter: indicate output2 switch to input32.EDID switchThis machine provide EDID include:1）1080I 2ch 2d2）1080I 6ch 2d3）1080I 8ch 2d4）1080P 2ch 2d5）1080P 6ch 2d6）1080P 8ch 2d7）1080P 2ch 3d8）1080P 6ch 3d9）1080P 8ch 3d10）12801024  DVI11）1080P DVI12）19201200 DVI4.Serial port instruction：sid+” ”x1+” ”x2+Enterx1 indicate the input port ，value range 1~f，1~4 indicate input1~input4,”f”indicate all inputx2 indicate the selected EDID，value range 1~c, corresponding EDID are above listed1~12 EDID。For example：sid 2 a+EnterIndicate input2 selec 12801024  DVI EDID5.Specification:                                  HDMI resolution……………………………………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480iSupport audio color format………………………………………………………………………………12bit Support audio format…………………………………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSDMax baud rate……………………………………………………………………………………………2.25GbpsInput and output TMDS signal……………………………………………………………0.5~1.5Volts p-pInput and output DDC signal………………………………………………………………5Volts p-p (TTL)Input cable distance.………………………………………………………………………≤10m HDMI AWG26Output cable distance…………………………………………………≤20m AWG26 HDMI standard cableMax working current…………………………………………………………………………………………1.3APower adapter format Input………………………input:AC(50HZ, 60HZ) 100V-240V;output: DC12V/3AOperating Temperature range……………………………………………………………… (-15 to +55℃)Working humidity range……………………………………………………5 to 90%RH (No Condensation)Dimension (L x W x H)………………………………………………………………………435*184*46 (mm)Weight…………………………………………………………………………………………………………1850g6.Operating and Connecting：1 Connect HDMI cable from HDMI source device into HDMI matrix input port2 Connect HDMI cable from HDMI matrix Output port into display3 Connect 12V External power adapter to the HDMI matrix4 The customer can switch the input signal to corresponding output port via the button on front panel.5 How to use RS-232 port?Through RS - 232 port you can updat software and monitor the state of the input and output signals. And it can switch signals via RS232. When connect to the computer, the customer can easily switch the signals via computer. 7.The Package includes:1. HDMI Matrix           x1pc2. IR Remote Control      x1pc3. 12V DC Power adapter   x1pc4. User Manual.           x1pc 8.Notes:Please use correctly and maintenance properly, to ensure product performance and work properly1.Should Stay away from damp, high temperature, dusty, corrosion and oxidation gas environment in order to avoid damage2.All parts should avoid strong vibration, no collision tapping and dro fall, to avoid damage.3.Do not touch the unit power adapter plugs with wet hand4.Unplug the adapter plug from the power socket, please hold the plug, don't pull the power cord5. please turn off the power supply when not use the machine.(unplug the power adapter plug when not use for a long time)6.Please do not open the machine cover, do not touch any device in the machine.7.Please use the power adapter provided or approved by the manufacturerPls Check the connecting cable carefully before the power on, Must ensure all interface are right connected.Common fault diagnosis and processing method is as follows：No.fault phenomenonReason and solution1No electricity1.Check that if power plug is properly inserted into the power outlet2.Check that if the power is on.2No image1.Confirm television has been turned on and is connected to the machine.2.Whether the input signal source open and connect in good condition.3.Check the connection state of the system.4.Check whether the cable is in good condition.5.Cable quality (HDMI cables is required to conform to the HDMI standard).3Image blurring1.reconnect the port, in case of poor connection of socket interface2.cable quality (HDMI cables is required to conform to the HDMI standard).4Remote control1.Check that if the remote battery insulation slices were taken out2.Whether the remote is with batteries