Click image to view original image
Automatic Fresh Air Oxygen Gas Aerosol Filling Machines
Machine Description
A. CJXH-2800B Type Fully Automatic Aerosol Filling Machine Production Line is manufactured based on the combination of advanced foreign technology and domestic aerosol filling industry development, famous for providing efficient and accurate performance.
B. Automatic aerosol filling machine is widely used to fill products in food, medicine, sanitation, automobile, environmental protection, fire protection and daily necessities, such as hair spray, air cleaning spray, health care, insecticides, disinfectants, extinguishing agent, carburetor detergent, spray paint, gas lighter and polyurethane foam, etc.
C. CJXH-2800B Fully Automatic Aerosol Filling Machine adapts origin Japanese (SMC and CKD) and Italian (metaL WORK) pneumatic components; cylinder gasket ring adapts import material, has accuracy of ±1%. And our fully automatic aerosol filling machine has own good reputation of being reliable, easy handling and easy maintenance.
Vacuum Crimping Part Description
1. The crimping head is mainly used to seal on the corrected and pressed valve with internal expanding mode. It needs to finish two steps respectively. Firstly, the pressure cylinder presses valves on the opening to make the valve rubber gasket flatten against the opening, usually the compression is 0.2-0.3mm.
2. Then, the pressure cylinder sends a signal to inform sealing cylinder to operate. The capper is fast, reliable, steady and easy to adjust sealed diameter and sealed depth manually without any tool.
Gas Filling Part Description
1. Two gas filling stations are composed by two independent filling machines. Gas filling machine has fully absorbed the advanced filling machine technology from the Swiss Pamasol Company. So as to accelerate filling speed and accurate measuring.
2. The measuring cylinder of inflator is made of 304 stainless steel materials. The processing techniques and precision are the same as the measuring cylinder of filling liquid machine.
3. The seal rings of inflator adopt CFRP skeleton rings of tetrafluoroethylene produced by American, which located in U-groove with stainless steel reeds inside.
4. When seal rings are normally worn in long-term operation, the outer diameter of seal rings will automatically compensate due to the function of reeds.
Working Process:
Technical Parameters:
| Adjustable Sealing Diameter (mm) | 26.5~28.5)±0.15 |
| Adjustable Sealing Depth (mm) | (0~7)±0.15 |
|
Applicable Aerosol Can Height (mm) Diameter (mm) |
60~350 20~100 |
| Working Pressure (MPa) | 0.45~0.7 |
| Maximum Air Consumption (L/min) | 50 |
| Maximum Filling Volume (ml) | 20-500ml(liquid phase) |
| Repeat Filling Accuracy | ±1.0% |
| Applicable Can Model |
Height 60~350mm Diameter 20-100mm |
| Working Pressure (Mpa) | 0.45-0.8Mpa |
| Maximum Air Consumption (L/min) | 60 |
Pictures
