Managed Fiber Media Converter

DLX-860 10/100M,10/100/1000M Managed Fiber Media Converters Chassis adopts 19inch, 2U standard height and contains 16slots in front panel. Offer a high price/performance ratio; realize conversion between 10M, 100M, 1000M Ethernet electrical port and optical port, support variety of data rate, SM/MM, single fiber/double fiber, and SFP etc. With simple set-up and complete function management interface, it supports protocols like SNMP, WEB, CONSOLE and TELNET, and realizes the integrated management to all chassis.

Functions of Hardware

1. Support 10Base-T, 100Base-TX, 100Base-FX, 1000Base-T

2. Meet standards IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3Z, IEEE802.3ah, TS1000

3. With high performance auto-sensing exchanging chipset meeting industrial standard, secure and steady data transmission is ensured with non-traffic jam exchanging performance.

4. Chassis supports both 10/100M media converters and 10/100/1000M media converters, and realizes mixing management of the two kinds of media converters

5. 10/100M and 10/100/1000M media converter cards can realize Max.2046bytes packet at store-and-forward mode, Max. 9K bytes packet at cut-through mode

6. AUTO-MDIX at electrical port, convenient for the user

7. Standalone chassis with internal special communication power supply, chassis support dual redundant power supply(support OLP function)

8. Fiber media converter module, SFP module, cascading card and NMS card support hot plug

Functions of Software

1. Master/slave structure,providing management module (master, slave), maximum 4 chassis cascaded can be managed

2. Supporting protocols like CONSOLE, WEB, Telnet and SNMP

3. Complete system information can be set up and displayed, including the name of the chassis, terrain information, related information of IP, constant operating time and the versions of the hardware and soft ware.

4. Real time display of voltage and temperature on the cards of the media converters, temperature of chassis and report fault in time.

5. Each port at local or remote devices can be set up or tracked, including the connecting status, connecting speed, half/full duplex, port locked and LFP etc..

6. With rate limiting, any rate between 0Mbps and 100M bps can be set at the basic frame of 32Kbps for10/100M media converter card, and any rate between 0Mbps and 1000M bps can be set at the basic frame of 64Kbps for10/100/1000M media converter card.

7. 10/100M media converter cards support management of IP113A/C/F/M, reduce the cost.

8. 10/100/1000M media converter cards support SFP, CWDM SFP and DWDM SFP, and it can show the SFP information and digital diagnosis function .

9. Supporting Link Loopback test, precisely locating the failure, convenient for link test

10. Remote power off alarming, precisely distinguish remote failure

11. With LFP, quickly locates the failure

12. With SNMP protocol, Trap Destination and Community Name and related right can be set up, real time receive and display of alarming information in way of SNMP Trap, special supervising window, bumping alarming information and mail alarming .

13. Offering MIB files, convenient to be merged to the third party’s SNMP

14. Powerful historical alarming and operating log information tracking and management function

15. Flow statistics and Pre-alarming function, real-time display of the communication status at each port

16. Equipment restart, system or module restart by management software, set-up information on each module will be stored spontaneously when power off

17. With graded management mode (common user, super user and administrator)

18. Reset to factory set up or dip switch status are optional

19. Supporting FTP online upgrading

20. NMS support network device auto-sensing and adding

21. With centralized management and Top tree, several chassis can be managed in the same interface at the same time; with grouping management any converter can be conveniently manipulated among many converters