Integrated Solar Street Light

Click image to view original image
Brand: Hengye
Price: 20.00USD/pcs
Min.Order: 1 pcs
Supply
Delivery: Shipment within 3 days since the date of payment
Address: China
Valid until: Never Expire
Updated on: 2019-10-29 16:28
Hits: 72716
Enquiry
Company Detail
 
 
Details

Integrated Solar Street Light

Light pole: High-quality steel, hot-dip galvanized, sprayed on the surface of the lamp body (color can be customized)
Power parameters: 220V ± 10V / 50Hz-60Hz
Voltage: ≤36V (inclusive)
Light cover material: Acrylic
Light body material: Aluminum
Light source type: LED
Power: 16W (inclusive) -20W (inclusive)
Irradiation area: 15㎡-30㎡
Lamp height: 8~15 meters
Protection level: IP65
Warranty period: 2 years
 
Product Details

1. This lamp holder show

n1.JPG

17YS-D-LED004 IP65
Lamp shape(L/W/H) Power(W) Material Path width Pole height Pole distance Ground illumination(LUX )
680/300/160 30/40/50/60 All aluminum 7m-llm 5m/6m/7m 15m-20m Max26 Average17
810/320/210 70/80/100 All aluminum 12m-20m 7m/8m/9m 20m-30m Max30 Average20
930/370/230 100/120/150 All aluminum 20m-30m 10m/llm/12m 30m-40m Max40 Average30

2. Polycrystalline silicon solar photovoltaic panels make photoelectric conversion high efficient and fast charging

n2.JPG

Solar cells: Polysilicon solar cells with high efficiency (17.5% or more) are packaged to ensure sufficient power generation of solar panels.

Glass: Low iron toughened suede GLASS (also known as white GLASS), with a thickness of 3.2mm and a transmittance of over 95%, has a high reflectivity for infrared light greater than 1200NM, and can withstand the radiation of ultraviolet light from the sun without decreasing the transmittance.

Rubber film EVA: The high-quality EVA film with a thickness of 0.78mm added with anti-ultraviolet agent, anti-gasification agent and curing agent is used as the sealant of solar cells and the connecting agent between glass and TPT, with high light transmittance and anti-aging ability.

Back glue TPT: The back of the solar cell is covered with fluoroplastic film, which is white and reflects sunlight. Therefore, the efficiency of

the component is slightly improved, and because of its high infrared emissivity, it can also reduce the working temperature of the component, which is also conducive to improving the efficiency of the component.Of course, the fluorine plastic film as solar cell packaging materials required by the aging, corrosion resistance, airtight and other basic requirements at first.

frame: The aluminum frame has high strength and strong mechanical impact resistance.

Power Optimum working voltage Optimum working current Short circuit current(A) Open circuit voltage Component size (mm) Weight (Kg) Operating temperature (℃)
60W 18 3.33 3.78 21.6

670*650*30

4.8 -40〜85

3. Featured digital constant current controller / intelligent energy saving, high conversion rate and multi-time lighting control

n3.jpg

Digital constant current controller features:

1. Full temperature-40-50℃, full power range, high precision, high efficiency and low power

2. Through the ultimate endurance test, to ensure reliability in extreme environments

3. Six hours programmable load power control

4. Intelligent battery charge and discharge management, intelligent energy-saving control

5. Temperature protection / photovoltaic cell polarity protection / overload protection / overcharge and overdischarge protection / battery polarity protection / sensor fault protection

6. Expandable infrared human body induction, voice-controlled microwave sensing. Remote communication control function.

Power Charging method Applicable method Discharge method The output voltage Maximum output / Charging current Operating temperature
120V/40W pwm Lead acid colloid Boost constant current

12V system: 17V-59V

24V system: 33V-60V

2. 0A/10A -35〜55

4. Built-in large-capacity gel battery / large-capacity power for long service life

n4.jpg

Gel battery characteristics:

High and low temperature resistance: wide temperature range (lead acid: -25 ° C ~ 45 ° C; colloid: -25 ° C ~ 45 ° C), Suitable for indoor and outdoor use in various environments.

Long life: Nano-colloidal electrolyte, corrosion-resistant, no electrolyte layer, battery design life lead acid is greater than 12 years, colloid is greater than 15 years.

Charging efficiency: Low-resistance raw materials and advanced process design, small internal resistance, and strong low-current charging capability.

Recovery performance: It adopts flat-pole plate and special lead paste formula, low self-discharge rate and deep discharge, and has strong capacity recovery ability.

Green and environmental protection: The battery formula does not contain cadmium substances that are polluted by the environment and difficult to recycle. The colloidal electrolyte has no leakage, which truly guarantees the environmental protection and safety of the battery.

Comprehensive performance: Product design and quality control, R&D and production management follow high quality requirements.

Name Adapted power Recharging current Discharge parameter Operating temperature℃ Overcharge protection Over discharge protection Size and weight
Lead-acid batteries (colloid) 50AH 5A 50W/14H Lead acid: -25℃~45℃
Colloid: -25℃~45℃
14.40±0.10v ≥10.80±0.10v 15.7kg

5. Built-in maintenance-free lithium battery / high capacity 1000 times or more cycle charge and discharge

n5.jpg

1. Digital intelligent detection operation, detecting the charge and discharge ratio to ensure normal lighting in rainy days.

2. Intelligent charging. Using light effect control, strong light fast charge and slow charge, to ensure efficient use of light energy.

3. Intelligent detection of matching light sources to effectively improve load efficiency.

4. Real-time reading of working status and writing working parameters on site.

5. Automatically detect overcharge and over discharge control and activate.

6. Relative to the battery, the lithium battery can be densely packed and has a high storage energy density. It has reached 460-600WH/KG, which is about 6-7 times that of lead-acid batteries.

7. Batteries with lithium ferrous phosphate as the positive charge and discharge through ICDOD. There are records that can be used 1000 times.

8. Self-discharge rate is low, no memory effect.

Name Load power Load performance Adapter PV module Adapter battery Size (MM) Time
Lithium battery machine 30W 10 string 3 and 90mA 60V 20WH 550*109*54 30W6h  20W10h

6. Led solar street light equipment

The company has first-class LED series production equipment and testing equipment

LED solar energy production, testing, assembly workshop intelligent production line, testing equipment

Hengye LED production workshop has intelligent production automatic assembly line, all kinds of testing equipment. LED high-power placement machine, beading machine, CNC reflow soldering machine ensure high standard, high speed and high quality of LED intelligent production; which can ensure the normal operation of the lamp in a wide range of voltage levels; The detection system can quickly detect the light source parameters and issue the test report.

n6-x.jpg

Large stock and Capacity guarantee
n6-2.jpg

Total: 0 [Show All]  Related Reviews
 
More »Our Others Products

[ ProductsSearch ]  [ Add To Favourite ]  [ Tell Friends ]  [ Print Content ]  [ Violation Report ]  [ Close Window ]