Click image to view original image
DC Hid Kit Features:
1.Superior performance, high performance and low power consumption
2.Safety: HID ballast potting through advanced technology, high-density, waterproof, dustproof, shockproof,anti-collision.
3.The optimal color temperature
4.High Standard: measure up original light standard, switch clear and accurate between high light and low light
5.Intrgrated structure and easy installation: Just put into the original Xenon lamp light holes, fixed ballast, access to power lines, do not need to change original parts.
6.Low power consumption and high efficiency : HID Lamp power is only 35W, compared to traditional auto lamps save up to 1/2 power consumption.
HID ballast parameters
Input voltage range:9-16v
Output power: 35W/55w
Input current: 3.5A~6A
Lifespan:>3000hours
Instant ignition voltage: 23000v~25000v
Working temperature:-45°C~105°C
AUTO HID KIT:Starting voltage:23v
AUTO HID KIT:Output power: 35W/55w
AUTO HID KIT:High luminance:2500~3500LM
AUTO HID KIT:Lifespan:>3000hours
AUTO HID KIT:Color temperature:3000k-4300k-5000k-6000k-8000k-10000k-12000k
Matec hid kit testing progress:
1. All the electronic components in the ballast are brand new, we never use second-hand material.
2. Complete protection function: under voltage protection, over voltage protection, short circuit protection, open circuit protection, reverse polarity protection. Constant power output and low current startup, which reduces ballast impact to prolong the service life of bulb, and delays the failure of bulb color temperature. Generally others' ballasts lack of one of the short circuit protection,open circuit protection and reverse polarity protection or more.
3. For testing, we have about 80 workers make and test products and can produce about 2000pcs/ day.(many other hid factories just have 15-20 people to finish all the production and testing). All of our ballasts have to be tested as follow:
A. Supplied material testing: for IGNITION COIL, transformer, discharge tube and CBB capacitor and some other important components, our factory ICQ should test all fully then they can be put on the production.
B. Workers from every procedure are responsible for the inspection of the corresponding procedure.
C. Semi-manufactured goods testing by QC, lighting 3 seconds, strobe 5-8 times.
D. Finished products after filling pastern testing, about one hour aging, to guarantee the durability, then frequently flicker testing 5 minutes ( 3 times per second).
E. Pack the Finished products and entry the warehouse. Each carton has 50 ballasts, sampling 4 ballasts for testing, if there is 1 ballasts in 4 defective then return the whole carton back to the work shop to remake.
F. Full testing when taking out of storage. Every ballast connect the bulb, lighting 20 seconds, strobe 10 times, then pack them and shipping.
