Fuel Injectors & Parts 0 445 120 078 INJECTOR 0445120231 for heavy truck engine parts

Click image to view original image
Brand: DICSCL PARCS
Price: Negotiable
Min.Order:
Supply
Delivery: Shipment within 3 days since the date of payment
Address: China
Valid until: Never Expire
Updated on: 2019-12-14 11:17
Hits: 84045
Enquiry
Company Detail
 
 
Details

Fuel Injectors & Parts 0 445 120 078 INJECTOR 0445120231 for heavy truck engine parts

CHINA-LUTONG is specialize in providing high quality common rail injectors.

The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.Lower fuel pump peak torque requirements. As high speed direct injection (HSDI) engines developed, more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older, IDI combustion systems. only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions. To generate the energy required to inject the fuel in approximately 1 millisecond, the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution, thus placing considerable strain on the drive shaft. One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement. While the power and average torque requirements of the common rail pump were similar, high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump. Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.

 

Improved noise quality. DI engines are characterized by higher peak combustion pressures and, thus, by higher noise than IDI engines. It was found that improved noise and low emissions were best achieved by introducing pilot injection(s). This was most easily realized in the common rail system, which was capable of stable deliveries of small pilot fuel quantities over the entire load/speed range of the engine.


#fuel injector price#
#fuel injector prices toyota#
#Fuel Injector RE44508#
#fuel injector rebuild#
#fuel injector repair parts#
#fuel injector replacement#
#fuel injector seals#
#fuel injector suppliers#
#fuel injector systems#
#fuel injector vw#
#Fuel Injector Wholesale#
#Fuel Injectors#
#fuel injectors #
#Fuel Injectors & Parts#
#fuel injectors diesel#
#high pressure fuel injector#
High Pressure Fuel Injector #
HINO diesel injector
hino diesel injectors
hino fuel injector
HINO injector
hino injector replacement
HINO injectors
hino truck injector
hyundai fuel injector
hyundai fuel injectors
industrial injection cummins injectors
Injector
INJECTOR 0445120231
Injector 29279#

E-mail:fuelinjectionparts @hotmail.com
WhatsApp:+8613666931970
QQ :2850613608

DEC GAO

Total: 0 [Show All]  Related Reviews
 
More »Our Others Products

[ ProductsSearch ]  [ Add To Favourite ]  [ Tell Friends ]  [ Print Content ]  [ Violation Report ]  [ Close Window ]