Click image to view original image
1. INTRODUCTION
Wireless HDMI is a simple solution that you can flexibly put your HDMI where you want without cable. This system comes with a transmitter that connects to your HDMI source and a receiver that mounts your display via HDMI. HDMI wirelessly connects device that source video and audio content such as a PC, game console, set-top box, Blue-ray(TM) DVD or DVR to any high-definition digital TV, LCD display and projector. Thus, you can create an uncluttered home-entertainment environment or mount your projector on the ceiling without the hassle of cables.
This product provides a wide-range with the capability of penetrating walls. You can just plug and play the WHDMI-MM to enjoy high-definition environment.
The purpose of this specification is to document the requirements for wireless HDMI product with IEEE 802.11N protocols.
2. ACRONYMS AND DEFINITIONS
Acronym Description
|
HDMI High-Definition Multimedia Interface
HDPC High-Bandwidth Digital Content Protection
NTSC National Television System Committee
PAL Phase Alternating Line
AES Advanced Encryption Standard
|
|
|
3. GENERAL FEATURES
3.1 Overall Features
- 128bit AES Encryption for securing video transmission over wireless
- Using motion JPEG compression technology
- 40 meter LOS transmission system
- 20~30ms System Latency
- Support IR Blasting
- Support 802.11h DFS
- Support HDMI 1.3
- Support HDCP 1.1/1.2
- Support CEC
3.1.1 Transmitter End
Features Description
|
I/O Connector HDMI input (19 pins, type A) *1
|
Phone JACK 3.5mm (IR Blaster) *1
Power Button *1
FW Upgraded Button *1
USB CON *1 (Power Connector)
Resolution Support 640x480 @85fps
800x600 @85fps
1024x768 @75fps
1280x1024 @30fps
1600x1200 @30fps
720x480 @60fps
720x576 @50fps
Antenna PCB Antenna
Security WPA2 AES 128bit
IR Carrier Frequency(blaster) 36k-40kHz
IR data format NEC, SONY, PHILIPS RC5/RC6 (Bypass signal only)
CEC Standby Mode
One touch play
HDMI HDMI 1.3
HDCP HDCP 1.2
DFS Support 802.11h DFS
LED Power on/off
Signal Link
Operating Frequency 5.18G~5.825Ghz
Power Adapter AC input: 100V~240V(50~60HZ): DC output: 5V/2A
Operating Temperature 0~40°C
3.1.2 Receiver End
Features Description
|
I/O Connector HDMI output (19 pins, typeA) *1
Phone JACK 3.5mm (IR Blaster) *1
Power Button *1
FW Upgraded Button *1
USB CON *1 (Power Connector)
Resolution Support 640x480 @85fps
800x600 @85fps
1024x768 @75fps
1280x1024 @30fps
1600x1200@30fps
720x480 @60fps
720x576 @50fps
Antenna PCB Antenna
Security WPA2 AES 128bit
IR Carrier Frequency(blaster) 36k-40kHz
IR data format NEC, SOYN, PHILIPS RC5/RC6 (Bypass signal only)
CEC Standby Mode
One touch play
|
HDMI HDMI 1.3
HDCP HDCP 1.2
DFS Support 802. 11h DFS
LED Power on/off
Signal Link
Operating Frequency 5.18G~5.825Ghz
Power Adapter AC input: 100V~240V(50~60HZ);DC output:5V/2A
Operating Temperature 0~40°C
