Click image to view original image
Produce Overview:
The DA/AD module is specifically designed for BananaPi. It communicated with BananaPi through I2C bus. There is a LED light on the board that you can adjust brightness through DA. The module supply 4 ADC channel through header on the left side of module and the thermistor interface. The user can choose according to actual demand and use them. The module is easy to use even you don’t need to write C code. Because the module support wiringPi so you can use shell script to control it.
Produce Features:
l Use PCF8591T chip
l DA/AD in one module
l 8bit high resolution DA/AD
l Compatible with wiringPi
Supply thermistor and photoresistance
Port:
l Banana Pi connection port
l Thermistor interface
l 4 external analog channel
l Electric level switch jumper
l LED of DA choice jumper
Product Parameters:
l Working voltage: 2.5V-6.0V
l 8-bit successive approximation A/D conversion
l Multiplying DAC with one analog output
l Analog voltage range from Vss to VDD
l 4 analog inputs configurable as single ended or differential inputs
l Max sampling rate given by I2C-bus speed
−40°C to +85°C operation
Typical Application:
l Supply monitoring
l Reference setting
l Analog control loop
Typical Application:
l Supply monitoring
l Reference setting
l Analog control loop
More information:
The PCF8591 is a single-chip, single-supply low-power 8-bit CMOS data acquisition
device with four analog inputs, one analog output and a serial I2C-bus interface. Three address pins A0, A1 and A2 are used for programming the hardware address, allowing the use of up to eight devices connected to the I2C-bus without additional hardware. Address, control and data to and from the device are transferred serially via the two-line bidirectional I2C-bus.
The functions of the device include analog input multiplexing, on-chip track and hold
function, 8-bit analog-to-digital conversion and an 8-bit digital-to-analog conversion. The maximum conversion rate is given by the maximum speed of the I2C-bus.
