1x2 Multimode Mechanical Fiber

1x2 Multi-Mode Mechanical Fiberoptic SwitchFeatures Applications Unmatched Low Cost Low Insertion Loss 2 Coils Latching / No Latching High Channel Isolation Highly Stable and Reliable Epoxy-Free Optical PathOptical Signal Routing Optical Network Protection/RestorationConfigurable Optical Add/Drop Transmitter and Receiver Protection Network Test Systems InstrumentationPerformance SpecificationParameter Specification Operating Wavelength (nm)850 ± 40 or 1310 ± 40850/1310 ± 40Insertion Loss (dB)< 0.8 (P Grade),<1.0 (A Grade)< 1.0 (P Grade),<1.2 (A Grade)Wavelength Dependent Loss      (WDL) (dB)< 0.25< 0.30Polarization Dependent Loss (PDL) (dB)< 0.05Cross Talk (dB)> 35Return Loss (dB)> 35Switching Speed (typ.) (ms)4Operating Voltage (V)5Power Handling (mW)500Durability (cycles)>10 millionOperating Temperature (°C)0 ~ 70Storage Temperature (°C)- 40 ~ 85Physical Dimension (LxWxH) (mm)31.56 x 11.4 x 10.35Electrical Pin Configuration:Optical PathElectrical DriveStatus Sensor Pin 1Pin 5Pin 6Pin 10Pin 2-3Pin 3-4Pin 7-8Pin 8-9Path 1-2V +GNDNCNCOpenCloseCloseOpenPath 1-3NCNCGNDV+CloseOpenOpenCloseSpecifications may change without noticeDimensionsOrdering InformationMMS Operating Wavelength Port Grade Fiber Type Pigtail Type In/Out Connector  13=1310±40nm85=850 ±40nm83=850/1310nm0102=1x2P = P GradeA = A Grade1 = 50/125 multi-mode 2 = 62.5/125 multi-mode1=Bare fiber 2=900um Jacket0=None1=FC/APC2=FC/PC3=SC/APC4=SC/PC5=ST 6=LC