titanium alloy sheet

titanium is a   new  type of metal ,the performance of titanium is related to the content of carbon ,nitrogen  and oxygen.The pure titianium iodide impurity  comtemt  less than 0.1%,but  its low stength ,high performance plastic .99.25%pure titanium is :the density of (ρ) is 4.5g/cm3,the melting point of 172  silicon  titanium alloy wear-resisting flooring 5℃,coefficient  of heat comductivity is 15.24w/(m.k),tensile   strength b is 539mpa ,elongation is 25%,section shrinkage of PSI  is 25%,elastic  modulus  e  is 1.078*105Mpa,hardness  hb195
Titaniuim  Characteristic:high intensity 、high thermal  strength 、good corrosion resistance 、good low temperature performance 、chemical active
The supply of titanium plate thickness:0.3mm-30mm
Perennial supply grade:TA1、TA2、TC4
Cutting:cutting machine,water cutting ,wire cutting ;
We solemnly  promise :reliable quaity,genuine goods  ay a fair price .Titanium  plate there are two kinds of performance standards:
GB/T3621-2007,GB/T13810-2007；B265 ASTM F136
American  Standard  isASTM,ASTMF67.AMS4928
1、Grade:
American  Standard  grade :GR1、GR2、GR3、GR5、GR7、GR12
Russian  Standard  grade :RT1-00、BT1-0、BT1-2ect.
Nation  Standard  grade:TA0、TA2、TA3、TA5、TA6、TA7、TA9、TA10、TB2、TC1、TC2、TC3、TC4
Application standard:
1:GB 228metallic materials tensile testing at ambibent temperature.
2:GB/T3620.1titanium and titanium alloy  and chemical composition
3:GB/T3620.2chemical components  and components of titanium and titanium alloys are allowed to be misaligned.
4:GB4698 chemical analysis method of titanium sponge ,titanium ferroalloy.
Titanium plate  production specification:
T0.5-1.0mm×W1000mm×L2000-4000mm
T1.0-5.0mm×W1000-1500mm×L2000-3500mm
T5.0-30mm×W1000-2500mm×L3000-6000mm
T30-80mm×W1000mm×L2000mm
2、Titanium plate production status :
Hot working state(R)   Cold working state (Y) annealed condition(M)
3、Titanium plate manufacturing process:
Hot  forging  process in metal above  the recrystallization  temperature.
Hot  rolled under the above the recrystallization  temperature  of the rolling process.
Cold plasti deformation  temperature is lower than the temperature of the rolling process.
4、The  characteristic  of titanium  plate:
(1)Titanium plate surface oxide film is equivalent to a good durability  with separating agent,using titanium plate saves separating sgent ,so the plate is easy to peel,eliminates the  process  of plate pretreatment ,titanium plate to light than copper plate .
(2)Half titanium plate is life of a copper plate more than 3times ,according  to operating comditions  of uop to 10 to 20years with .
(3)Compact  crystal copper titanium plate making ,smooth  surface,good quality .
(4)Because  of titanium plate without smearing seperating agent ,which can aviod  the pollution .
(5)Increase in copper electroyte lower the production of electrolytic copper production costs,which have economic  benefits.