titanium alloy bar

 titanium is a new type of metal,the performance of titanium is related to the content of carbon,nitrogen ,hydrogen  and oxygen .The  pure  titianium iodide impurity content less than 0.1%,but  its low strength ,high performance plastic .99.5%pure titanium is :the dengsity of (ρ)is4.5g/cm3，the melitinig point of 172silicon titanium alloy wear-resistingflooring 5℃，coefficient  of  heat  conditivity  is 15.24w/(m.k),tensile strength  b  is 539mpa ,elongation is 25%,section shrinkage of PSI  is25%,section shrinkage of  PSI is 25%,elastic modulus e is 1.078*105Mpa ,hardness  hb 195


Titanium  Characterisitic :high intensity ,high thermal  strength,good  corrosion  resistance ,good  low temperature  performance ,chemical active


1、Titanium  rod  specification :
Titanium rod specification ：titanium and titanium alloy bar light ,titanium alloy bar ,titanium profiled ,titanium square  rod ,titanium shaft ,titanium stirring shaft ,titinaium screw.
The chemical  composition of  titanium alloy bar should be consistent with provisions of GB/3620.1,buyer the  reinspection ,the  chemical composition  of the devition should be allowed meet the provisions of GB/T3620.2.

2.Titanium rod production:
Nationoal  standard  of titanium :TA1、TA2、TA3、TA7、TA9、TA10、TC4、TC4EIL、TC6、TC9、TC10、TC117、GR12、A221
3、Performance  standard  for titanium rods :
Titanium rods standards of GB,GB/2965-2965,GB/T13810,Q/BS5331-91;
American standard ASTM B348,ASTM F136,ASTM F67,AMS4928.
The  sign :GR1,GR2,GR3,GR5,GR