titanium alloy bar

  Titanium is a new type of metal ,the performance of titanium is related  to the content of carbon,nitrogrn ,hydrogen and oxgyen .The pure titanium iodide  impurity content less than 0.1%,but  its low strength ,high performance plastic .99.5%pure titanium is :the density of (ρ) is4.5g/cm3.the melting point of 172silicon  titanium  alloy wear-resisting flooring 5℃，coefficient of heat conductivity is 15.24w/(m.k),tensile strength b is 539mpa ,elongation is 25%,section shrinkage of PSI is 25%,elastic modulus  e  is 1.078*105Mpa ,hardness  hb 195.


Titanium Characterisitic :high intensity ,high thermal strength ,good corrosion  resistance ,good low temperature  performance ,chemical active .

Titanium  alloy density is about 4.5g/cm3,only 60%of steel,the strength of pure titanium was close ti ordinary steel strength ,high strength titanium allou than many allooy structural steel strength .Therefore titanium alloy strength (strength/density )is much larger than other metal structure  materials ,see  table ,can be negine component ,the plane  frame ,skin ,fasteners  and  landing gear  and so the use of titianium alloy .

1、Titanium rod specifications:
Titanium rod specifications:titaniuim  and titanium alloy bar titanium ,titanium alloy bar ,titanium profiled ,titaniumsquare rod ,titanium shaft,titanium stirring shaft ,titanium screw.
The chemical  composition of titanium alloy bar should be consistnet with provisions  of GB/3620,buyer  the reinspection ,the chemical composition of the devition should be allowed meet the provisions of GB/T3620.2
2、Titanium rod production:
National  standard  of titanium :TA1,TA2,TA3,TA7,TA9,TA10TC4,TC4ELI,TC6,TC9,TC10,TC117,GR12,A221
3、Performance   standards of titanium rods :
Titanium rods standards of GB,GB/2965-2965,GB/T13810,Q/BS5331-91;
Ameican  standard  ASTM B348,ASTM F136,ASTM F167,AMS4928