Click image to view original image
| Chlorodiethyl-Aluminum | |
| Abbreviation： | DEAC |
| Formula： | Cl(C2H5)2Al |
| Molar Mass： | 120.56 g/mol |
| CAS-Reg.-No.： | 96-10-6 |
| EINECS-No.： | 202-477-2 |
| Hydrolysis gas composition | |
| Ethane * | min. 99.3 % m/m |
| n-butane | max. 0.5 % m/m |
| isobutane* | max. 0.1 % m/m |
| hydrogen* | max. 0.1 % m/m |
|
DEAC MIN96%WT |
|
| aluminum** | Min. 22.0 % wt |
| Cl/Al | 1.00-1.03 m/m |
| Typical value： | |
| ethane* | min. 99.8 % m/m |
| n-Butane* | max. 0.1 % m/m |
| isobutane* | max. 0.05 % m/m |
| hydrogen* | max. 0.05 % m/m |
|
|
|
| aluminum** | min. 22.2 % wt |
| Cl/Al | 1.01 m/m |
|
*Calculation of the hydrocarbon gas chromatographic calculation. **Titration of aluminium and chlorine by hydrolysis products. |
|
| Technical Data：（Values determined on representative samples or taken from literature） | |
| State | clear colourless liquid at 20°C |
| boiling point | 3mmHg，60℃ |
| 9mmHg， 80℃ | |
| 24mmHg， 100℃ | |
| 47mmHg， 120℃ | |
| 50mmHg， 127℃ | |
| 78mmHg， 140℃ | |
| 760mmHg， 208℃ | |
| freezing point | -78℃ |
| density | 25℃ ， 0.962 g/cm3 |
| viscosity | 25℃ ， 1.3 mPa.s |
| 30℃ ， 1.4 mPa.s | |
| specific heat | 57℃ ， 1.715 J/g-K |
| Vaporization heat | 1bar ， 172 kJ/kg |
| Hydrolytic heat | 25℃ ， 3703 kJ/kg |
| Combustion heat | 25℃ ， -3577 kJ/m |
| stability：At above 150 ℃, especially during 170-180 ℃, have apparent decomposition phenomenon can be observed. After contact with air combustion; Contact with water can be violent reaction, may burn. | |
| Supply form：can provide pure products, can also according to customer's requirements, provide any concentration of hydrocarbon liquid. | |
| Industrial applications：catalysts for the production of polyolefin and synthetic rubber. Intermediates for the production of organic compounds. | |
| Packaging： the use of capacity of 1-6000 kg for the safe transport of special containers. All containers conform to the prevailing traffic regulations. | |
| Tags：according to the current EU and Chinese regulations classification and labeling. For further details, please refer to our security data sheet. | |
| Treatment： detailed in our brochure in processing. In general, when dealing with this product, it is necessary to comply with local laws and regulations. | |
| The information contained in the above is to provide advice, and to give us the best knowledge. It can not be considered our obligation to use when it involves a variety of possible working methods and applications and any third party patent right, we do not assume any responsibility. | |
