Click image to view original image
| Aluminium ethyl dichloride | |
| Abbreviation： | EADC |
| Formula： | Cl2C2H5Al |
| Molar Mass： | 126.95 g/mol |
| CAS-Reg.-No.: | 563-43-9 |
|
EINECS-No.: |
209-248-6 |
|
Hydrolysis gas composition |
|
| Ethane* | min. 99.3 % m/m |
| n-butane* | max. 0.5 % m/m |
| isobutane* | max. 0.1 % m/m |
| hydrogen* | max. 0.1 % m/m |
|
|
|
| aluminum** | min. 20.9 % wt |
| Cl/Al | 1.99-2.03 m/m |
| Typical value： | |
| ethane* | min. 99.8 % m/m |
| n-Butane* | max. 0.1 % m/m |
| isobutane* | max. 0.05 % m/m |
| hydrogen* | max. 0.05 % m/m |
|
|
|
| aluminum** | min. 21.1 % wt |
| Cl/Al | 2.02 m/m |
|
*Calculation of the hydrocarbon gas chromatographic calculation. **Titration of aluminium and chlorine by hydrolysis products |
|
|
Technical Data：（Values determined on representative samples or taken from literature） |
|
| State | At room temperature, is a colorless or pale yellow crystal. In the above 35 degrees Celsius, is a colorless or light yellow transparent liquid. |
| boiling point | 5mmHg， 60℃ |
| 10mmHg， 80℃ | |
| 30mmHg， 100℃ | |
| 50mmHg， 115℃ | |
| 760mmHg， 194℃ | |
| freezing point | 30-32℃ |
| density | 25℃， 0.927 g/cm3 |
| 50℃， 1.21 g/cm3 | |
| viscosity | 40℃， 2 mPa.s |
| Combustion heat | 25℃， -3100 cal/g |
| stability：At above 150 ℃, especially during 170-180 ℃, have apparent decomposition phenomenon can be observed. After contact with air combustion; Contact with water can be violent reaction, may burn. | |
|
Supply form: according to customer requirements, to provide the required concentration of hydrocarbon fluids. |
|
| Industrial applications: the production of polyolefin and synthetic rubber initiator component. Aromatics hydrogenation catalyst. Intermediates for the production of organic compounds. | |
| Packaging: the use of capacity of 1-6000 kg for the safe transport of special containers. All containers conform to the prevailing traffic regulations. | |
| Tags: according to the current EU and Chinese regulations classification and labeling. For further details, please refer to our security data sheet. | |
|
Treatment: detailed in our brochure in processing. In general, when dealing with this product, it is necessary to comply with local laws and regulations. |
|
| The information contained in the above is to provide advice, and to give us the best knowledge. It can not be considered our obligation to use when it involves a variety of possible working methods and applications and any third party patent right, we do not assume any responsibility. | |
