Click image to view original image
RT-S0100 Intelligent Control Lead-Free High Frequency Soldering Station
Material List Soldering Station:
| Part Name | Specification | Description |
| surface box | 115*108*9mm | ABS material |
| protective sheet | 25*50*1.5mm | tempered (Acrylic) glass |
| button | 11.5*8mm | ABS material |
| panel | 110*105*1mm | metal materials |
| power switch | 22mm,6A250VAC | silver alloy contacts |
| back cover | 105*110*1mm | metal materials |
| power cord | 1.5m,6A/250V | 3core |
| aviation socket | GX16-6P(B) | metal material |
| cooling fan | No | dimensions,50*50*12mm |
| power transformer | RT-100 | high quality ring |
| control board | HF-005 | glass plate |
| drive circuit board | HF-001 | glass plate |
| grounded Block | 8*4mm | alloy plus temp materials |
| power outlet | 10A250VAC | copper temp materials |
| fuse | 2A/250V | 5*20mm,slow blow type |
| Electromagnetic iron | SI-100 | electromagnetic heating |
Core Technology YMK Soldering Station:
High quality ring transformer.
Reliability and security much higher than the switch power supply.
Rolled iron core uses the new high quality silicon steel sheet.
Winding adopts high temperature resistant high quality copper enameled wire enameled wire winding.
Power wastage loss less than 25%, electrical efficiency is as high as above 95%.
Unload current Only 10% from the EI type; no electromagnetic radiation and no vibration noise.
Heating Theory YMK High Frequency Soldering Station:
The principle of high frequency eddy current heating (induction heating principle), High frequency Lead free soldering station is heat up at soldering tip itself, and no heat conduction, reduce thermal losses, heat up fast and temperature returning quickly.
Auto Sleep Mode Operation:
If you have been chose the working mode with “ auto sleep & auto shutdown” , it will be show “ ---“ in display if soldering iron not use for over 20 minutes, by now the temperature of soldering tip will be down to 200 °C if the setting working temperature greater or equal to 200 °C or down to 50°C if the setting working temperature below 200 °C , station will keep this temperature until recover the soldering.
There are three ways to wake up sleeping:
1. Turn off the power switch and then turn on again.
2. Press any button in Station.
3. Pick up the soldering iron.
Please attention that it can’t wake up If the Soldering station over 40 minutes in sleeping condition, soldering iron will cut off the power supply in automatically and no any showing in display.
Photo Showing:
